AS-i sensor network gets a junction brick for hazardous locations

Turck JBBS junction bricks for AS-interface industrial sensor network gains FM approval for Class I, Division 2, Groups A, B, C and D hazardous locations. JBBS junction bricks are said to simplify the connection of multiple field devices and can be mounted directly on the machine in hazardous environments, without an enclosure.

September 23, 2010

Turck JBBS junction bricks for AS-interface networks gained FM approval for use in Class I, Division 2, Groups A, B, C and D hazardous locations. JBBS junction bricks are said to simplify the connection of multiple field devices and can be mounted directly on the machine in hazardous environments, with no enclosure required.

The bricks include options with 4, 6 or 8 short-circuit protected ports that can be shut off via integrated dip switches located under the cover of the station. This design allows users to service the device while maintaining normal operating conditions in the hazardous area, minimizing downtime.

The IP69K-rated JBBS junction bricks are available with M12 or 7/8-16UN connectors in stainless steel or nickel-plated brass.

www.turck.us

Turck

– Also read:

I/O Modules: Product research and advice from Control Engineering subscribers

Turck offers Gen. 2 AS-interface (AS-i) safety gateways manufactured by Bihl+Wiedemann

RFID slice: Turck BL67 modular distributed I/O system has a Simple RFID (RFID-S)