Compact HMI and Panel PC series embedded terminals

Bosch Rexroth's IndraControl VR series of HMIs and embedded terminals feature an ARM Cortex-A8 800 MHz processor, 512 MB of RAM, 256 MB of flash memory, and an integrated SD card memory slot.

By Bosch Rexroth September 22, 2014

Bosch Rexroth’s IndraControl VR series of HMIs and embedded terminals are designed to be an alternative to PC-based panels. The VR HMI uses a 16:9 format and is available in 4 in., 7 in. and 9 in. sizes. The 7 in. and 9 in. panels also have a capacitive screen, multi-touch option. They also feature an ARM Cortex-A8 800 MHz processor, 512 MB of RAM, 256 MB of flash memory, and an integrated SD card memory slot. Rexroth’s HMI programming software, WinStudio, can be used to develop applications for the VR controller, moving all Rexroth operator interfaces to the same programming development software. They also come with an on-board Ethernet 10/100 Mbit port and two USB interfaces and over 100 drivers can be connected to the VR HMI.

Bosch Rexroth

www.boschrexroth-us.com 

– Edited by CFE Media. See more Control Engineering HMI and operator interface products.