Customizable angle sensor series for industrial, medical applications
Novotechnik's Vert-X 2800 Series of sensors are designed to measure angular position and are designed for industrial, medical and off-highway vehicle applications and can operate in harsh conditions.
Novotechnik’s Vert-X 2800 Series of sensors are designed to measure angular position and convert rotational angle into an analog or digital output. These sensors are designed for industrial, medical and off-highway vehicle applications with an operating temperature range of -40 to 85°C and high immunity to emissions. Users can select a stock part to simply measure angle or they can be configured, using a tool called Easy Adapt, to be application-specific. Possible configurations include start- and end-angles for less than 360-deg maximum range, index point, cw or ccw indication, calibration settings, and non-linear curves. Vert-X 2800 Series sensors are available in single and fully redundant versions. Measurement range is 0- to 360-deg and available analog outputs are 4 to 20 mA, 0.1 to 10 V, 10 to 90% of supply voltage and 5 to 95% of supply voltage. Digital output choices are SPI or PWM. Up to two programmable TTL-level switches are options. Other key Vert-X 2800 Series specifications include housing base diameter of 28 mm, up to 14-bit resolution and linearity to ±0.1 % of measurement range. The sensors are sealed to IP 65, life is ≥ 50 million movements and MTTF is over 100 years.
Novotechnik
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.