Customizing electrical enclosures

Enclosure cutouts can be made after a purchase. However, cutouts made by the manufacturer may help save time and reduce costs.

04/05/2017


Figure 1: This standard-size AutomationDirect enclosure was customized by the manufacturer. Courtesy: AutomationDirectWhen designing control systems for machines, standard or custom electrical enclosures are needed to house automation hardware. The development of these electrical enclosures grew with the use of electricity in the early 20th century. Today's electrical enclosures support the commercial and industrial markets by protecting a wide variety of automation hardware and wiring from ambient environments.

There are thousands of part numbers for different types and sizes of electrical enclosures made from a variety of materials including carbon steel, galvanized steel, stainless steel, and non-metallic materials, such as fiberglass or polycarbonate.

Selecting electrical enclosure features based on the required size and environmental conditions is the starting point of the design. The design phase includes panel layout, enclosure layout, and thermal considerations to determine how the enclosure must be customized to meet requirements. The main customization step usually is making cutouts in the enclosure, a procedure that can be performed in-house or by the manufacturer (see Figure 1). 

Customizing the electrical enclosure

In some cases, it can be advantageous to have the manufacturer provide an enclosure with customized cutouts. The types of enclosure cutouts include:

  • Human-machine interface (HMI)
  • Gauges and meters
  • Pushbuttons, switches, and lights
  • Potentiometers and thumbwheels
  • DIN controllers.

Cutouts made by the manufacturer reduce end-user labor costs and can improve quality. If the same type of enclosure and cutouts are repeatedly required, as is the case for many OEM machine builders, the manufacturer often can provide a part number to simplify ordering.

Cutouts often take significant time to layout, drill, and cut. In many cases, there is little room for error. Crooked or oversized cutouts present a poor appearance and compromise the enclosure rating. Touch-up paint may be required after cutouts are made, further adding time and expense.

When a manufacturer makes cutouts, they can use their manufacturing and fabrication facility's resources to ensure all work is done correctly and precisely, and without compromising the enclosure. 

Figure 2: Manually cutting electrical enclosures requires careful layout and measurement, along with the correct equipment and skill set. Courtesy: AutomationDirectPrecautions for electrical enclosure cutouts

Do-it-yourself (DIY) cutouts can be made in the electrical enclosure after delivery, but this requires several steps. Each cutout needs to be carefully measured and marked (see Figure 2), with care to avoid any scratches, which may require taping. With the cutout's shapes properly aligned, spaced, and marked-drilling and cutting can begin.

Significant time is required to layout and cut the holes. Power tools and special supplies are required. While polycarbonate or fiberglass can be easy to cut, carbon steel and stainless steel enclosures quickly consume cutting blades, and special tools are needed to make large holes.

Once the holes are cut, they must be smoothly filed to remove burrs and rough or sharp edges. Cleanup of cutting debris, oil and tape and removal of cutout markings also is required. After cleanup, the bare steel edges, exposed by cutting, must be painted to inhibit corrosion. At this point, the actual panel build and assembly can begin.

Despite the care required when making DIY cutouts, this can be the best option if just a few simple cutouts are needed, particularly for polycarbonate or fiberglass enclosures. Another scenario where DIY cutouts are the best option is when the OEM or end-user has significant machine shop resources on-hand for cutting, grinding, and painting. 

Figure 3: The Enclosure Customizer tool from AutomationDirect was used to quickly create this custom cutout enclosure drawing. Courtesy: AutomationDirectQuicker cutouts for electrical enclosures

To get to the build and assembly stage faster, purchasing a customized enclosure directly from a manufacturer is another option. This does not eliminate the design phase, and cutouts still may need to be added. But it does significantly simplify the build phase, especially if multiple, duplicate enclosures are produced. The result is a customized enclosure, with accurate cutouts to exact specifications.

Many enclosure manufacturers offer customized enclosures with factory cutouts per each end user's or OEM's specifications. Some of these manufacturers also offer an online graphical configuration utility that can be used to select several cutout types and sizes, which the user can place in one of several standard enclosures.

Once the electrical enclosure is designed and the drawings are approved, the next steps that take place are the:

  1. Customized enclosures are typically cut and fabricated by automated equipment including laser cutting, bending and welding machines
  2. Enclosures are then painted, and baked in an oven if required
  3. Electronic drawings also are typically included, such as a 3-D model of the enclosure and a 2-D drawing with dimensions.

Customized enclosures are built to order and cannot be returned unless they are damaged during shipping. This highlights the need to carefully design the enclosure cutouts. Careful attention to the cutout's dimensions or using standard cutouts provided by the enclosure manufacturer helps guarantee the customized enclosure meets the design requirements.

Figure 3 depicts a customized enclosure design that was created using an online graphical configuration utility provided by a manufacturer. Using standard cutouts and enclosure sizes works for many applications and helps ensure an accurate design that is simple to create. After the design is created, reviewing and approving the customized enclosure drawings is the final step to purchase the customized enclosure.

Many steps are required to specify and customize an electrical enclosure. For some end-users and OEMs, it may be advantageous to have the enclosure manufacturer make the required cutouts, particularly if in-house resources are limited.

Jim Krebs, technical marketer at AutomationDirect. Edited by Emily Guenther, associate content manager, Control Engineering, CFE Media, eguenther@cfemedia.com.

MORE ADVICE

Key Concepts

  • Electrical enclosure design features.
  • How to customize electrical enclosures.
  • Purchasing a customized electrical enclosure.

Consider this

For you, would there be a lower total cost of ownership with ready-to-use enclosures?



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me