Data acquisition system for test and measurement applications
Micro-Measurements' System 9000 StrainSmart Data Acquisition System is designed for test and measurement applications in the automotive, aerospace, rail, consumer, and military testing industries.
Micro-Measurements’ System 9000 StrainSmart Data Acquisition System is designed for test and measurement applications. It features a scanner with 12 RJ-45 strain gage inputs and four configurable auxiliary slots to accommodate signals from thermocouples, piezoelectric sensors, and high-level voltage sensors. The System 9000 provides scanning rates up to 50,000 samples/second and supports full-, half-, or quarter-bridge configurations. It is designed for the automotive, aerospace, rail, consumer, and military testing industries.
Users can deploy scanners independently or use up to three together for 48 channels (36 strain gage and 12 configurable) of fully synchronized data acquisition. Each channel’s data is processed in a 24-bit digital signal processor with filtering via finite impulse response (FIR) multi-state filters for noise rejection, stability, and measurement accuracy. The System 9000’s scanner communicates with a host PC via an auto-configured 100 Mbit DHCP Ethernet connection. To eliminate downtime associated with sending the unit back to the factory for periodic calibration, the System 9000 is available with an optional system voltage calibration card. The card allows the gain and offset of each channel to be calibrated under actual operating conditions, minimizing errors due to environmental factors.
Micro-Measurements
www.micro-measurements.com
– Edited by CFE Media. See more Control Engineering data acquisition products.
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.