Digital panel meter series for process, temperature inputs
AutomationDirect’s ProSense line of digital panel meters offers a simple and cost-effective solution to display analog process, temperature, load cell, and potentiometer inputs and feature IP65-rated meter faces and are available with 1/32 and 1/8 DIN housings.
AutomationDirect’s ProSense line of digital panel meters offers a simple and cost-effective solution to display analog process, temperature, load cell, and potentiometer inputs. Configuration parameters can be totally or selectively locked out to prevent unauthorized or accidental changes. Two-point direct or reverse acting linear scaling values can be entered manually or by introducing actual sensed process values. Models feature IP65-rated meter faces and are available with 1/32 and 1/8 DIN housings.
ProSense DPM1 series panel meters are designed to display analog process signals, including +/-10V and +/-20mA. The 4-digit red LED display is easily scaled into any engineering units from -1999 to 9999 with a selectable decimal point location. Non-linear processes can be scaled by entering up to 16 scaling points. Other features include two SPST relay outputs that can be set to activate on an increasing or decreasing input signal with hysteresis or time delay operation, retention and reset of minimum and maximum display values, a tare function, filtering to minimize display bounce, and display brightness adjustment.
The DPM2 series displays analog process signals, temperature in either Fahrenheit or Celsius from RTD or thermocouple temperature sensors, or potentiometer inputs. The models feature a 4-digit red LED display which is easily scaled into any engineering units from -9999 to 9999 with a selectable decimal point location. Temperature inputs are pre-configured for fixed temperature ranges based on the type of temperature sensor and can be displayed with 1 or 0.1 degree of resolution.
ProSense DPM3 series panels display analog process signals, temperature in either Fahrenheit or Celsius from RTD or thermocouple temperature sensors, load cell, or potentiometer inputs. The 5-digit tri-color red/green/amber LED display is easily scaled into any engineering units from -19999 to 39999 with a selectable decimal point location. Non-linear processes can be scaled by entering up to 11 scaling points.
AutomationDirect
www.automationdirect.com
– Edited by CFE Media. See more Control Engineering process sensor and actuator products.
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.