Electrical noise—what a racket

Every electrical circuit has noise in it. Noise becomes undesirable when the signal-to-noise ratio becomes low enough to adversely effect the operation of the electrical circuit.Electrical or electromechanical devices that cause fast or large changes in voltage or current are common sources of noise.

05/01/1998


Every electrical circuit has noise in it. Noise becomes undesirable when the signal-to-noise ratio becomes low enough to adversely effect the operation of the electrical circuit.

Electrical or electromechanical devices that cause fast or large changes in voltage or current are common sources of noise. Radio frequency noise can come from walkie-talkies, wireless computer systems, and other radio based systems. Typical noise sources include lightning, power-line switching, switching inductive loads, arcs, fluorescent lights, welding machines, inadequate separation of conductors of different levels, static discharge, harmonics, and ground loops. Noise can appear in both power and signal (control) lines.

Noise is often described by how it is coupled into a circuit. Five basic types of couplings are capacitive, inductive, radio frequency, common impedance, and conducted.

Electromagnetic interference (EMI) or radiated noise is coupled into a circuit depending on how close the source is to the receiver. In general, if the receiver is less than about one-sixth of a wavelength from the radiating source, the noise coupling mechanism will be dominated by either capacitive or inductive effects, but if it is greater than one-sixth wavelength, the radiated noise is a plane wave and the coupling will be by radio frequency effects. This is commonly called radio-frequency interference (RFI).

Capacitive or electrostatic noise is coupled into a circuit via a capacitive effect and is voltage-based. A voltage difference between two conductors separated by air or other insulating materials create a capacitor through which noise can be coupled.

Inductive or magnetic-coupled noise reaches a circuit via an inductive effect and is current-based. Current flowing through one circuit induces noise current in another circuit. The portion of the circuit into which the inductive noise is coupled can be viewed as a single loop or coil being inductively coupled by a noise coil (circuit).

The complex coupling mechanism of RFI is based on reflection, adsorption, and antenna effects. The effectiveness of coupling RFI into a system is a function of the radiating source, its strength, the characteristics of the transmission path, the distance involved, and the receiver's sensitivity.

Common impedance coupling occurs when different circuits share common wires (impedances). Shared ground wires and long common neutrals or return paths can cause common impedance coupling.

Conducted noise is coupled into a circuit via transmission of noise by wires or other conducting materials. Sooner or later, all other coupled noise becomes conducted noise. Conducted noise is generally defined as two types, normal mode and common mode. Normal mode noise is defined between the conducting wires and the circuit reference and common mode noise is defined between the circuit conductors and ground.

The different types of noise coupling are illustrated. Two good references in the area of electrical noise are "IEEE 518—IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources" and "Noise Reduction Techniques in Electronic Systems," by Henry W. Ott.



Terms

Capacitive or electrostatic noise: noise coupled into a circuit via a capacitive effect and is voltage-based.

Common impedance: when two circuits share a common wires.

Conducted noise: noise coupled into a circuit via wires or other conducting materials.

Coupled circuits: where one circuit induces changes in another circuit through a common connection, either through conductive materials or electromagnetic fields.

Electrical noise: unwanted electrical signals and their result. Noise is often described by how the noise is coupled into a circuit.

Inductive or magnetic noise: noise coupled into a circuit via an inductive effect and is current-based.

RFI noise: radio frequency interference or radiated noise is planewave propagation of noise and varies by distance from source.



The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
HMI effectiveness; Distributed I/O; Engineers' Choice Award finalists; System Integrator advice; Inside Machines
Women in engineering; Engineering Leaders Under 40; PID benefits and drawbacks; Ladder logic; Cloud computing
Robotic integration and cloud connections; SCADA and cybersecurity; Motor efficiency standards; Open- and closed-loop control; Augmented reality
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
HMI effectiveness; Distributed I/O; Engineers' Choice Award finalists; System Integrator advice; Inside Machines
Women in engineering; Engineering Leaders Under 40; PID benefits and drawbacks; Ladder logic; Cloud computing
Robotic integration and cloud connections; SCADA and cybersecurity; Motor efficiency standards; Open- and closed-loop control; Augmented reality
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
HMI effectiveness; Distributed I/O; Engineers' Choice Award finalists; System Integrator advice; Inside Machines
Women in engineering; Engineering Leaders Under 40; PID benefits and drawbacks; Ladder logic; Cloud computing
Robotic integration and cloud connections; SCADA and cybersecurity; Motor efficiency standards; Open- and closed-loop control; Augmented reality
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me