Global PV installations to grow by 21% in 2012

Global solar PV installations will grow by at least 3.5% and up to 21% in 2012, according to a new report from IMS Research.

04/04/2012


Global solar PV installations will grow by at least 3.5% and up to 21% in 2012, according to a new report from IMS Research, recently acquired by IHS Inc. The market analyst firm forecasts that despite incentive cuts in most of the world’s largest markets, global installations will grow from 26.9 GW in 2011 to between 27.8 GW and 32.6 GW in 2012, with Europe’s share of installations falling from 69% last year to 50% this year.

IMS Research’s Q1’12 PV Demand Database, which tracks installations in more than 60 countries, revealed that new PV installations reached 26.9 GW in 2011 and its most-likely forecast shows this growing to 27.8 GW this year. (Note that figures are for installations and not grid connections; the figure for grid connections in 2011 would be much higher.) Ash Sharma, Senior Research Director for Photovoltaics, commented, “Despite many in the industry still expecting further doom and gloom, we in fact see a pick-up in demand driven by falling system prices, a rush to  beat incentive cuts, and the growing number of mid-sized emerging PV markets.”

Global PV Installations - Conservative, Most-Likely, and Optimistic Scenarios. Source: IMS Research's Q1'12 PV Demand Database

The new report’s ‘optimistic forecast’ shows installations growing by 21% to 32.6 GW this year. “It is no longer a case of whether the PV market will grow in 2012, the real question now is by how much will it grow,” Sharma explained. “When you only consider a handful of countries like Germany, Italy and France, it’s easy be pessimistic about demand; however, when you look further afield and analyse demand from 60 countries, the picture becomes much more positive.”,.

According to the Q1’12 report, at least 23 counties will install 100 MW or more this year, up from just 17 last year. “It is this geographic diversification that will help drive growth in global PV installations this year as the market becomes less dependent on just one or two markets. Ultimately it will also lead to stability for the industry in the longer term as the impact of a single country’s policy will weaken,” added Sharma.

PV Installation Forcase by Major Region. Source: IMS Research's Q1'12 PV Demand Database

Germany, however, is still predicted to remain the largest and most important PV market this year and despite the overhaul to its FiT policy, new installations are predicted to reach at least six GW this year and up to 8.5 GW is even possible. Such a result would have been almost unthinkable a few months back, but IMS Research found that demand in Q1 was extremely high in a rush to beat the incoming changes.

Although Germany will remain the largest market, IMS Research predicts that China will become the second largest, followed closely by Italy. “China remains one of the most unpredictable factors in the global supply and demand balance. With European demand faltering, the Chinese government is under increased pressure to accelerate domestic deployment to support its huge manufacturing base. Installations of up to eight GW would be unlikely in China this year, but still a possibility,” concluded Sharma.

Detailed analysis of PV installations in more than 60 countries is available from IMS Research’s quarterly PV Demand Database.



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
February 2018
DCS visibility, alarm management, motors and drives, robotic machining, Engineers' Choice winners
HMIs
Automation and controls continue to help HMI hardware and software advance. As computing capabilities progress, hardware has become more rugged with less maintenance required, with wider environmental capabilities, and integrated input/output (I/O) connections.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Machine Vision
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
February 2018
DCS visibility, alarm management, motors and drives, robotic machining, Engineers' Choice winners
HMIs
Automation and controls continue to help HMI hardware and software advance. As computing capabilities progress, hardware has become more rugged with less maintenance required, with wider environmental capabilities, and integrated input/output (I/O) connections.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Machine Vision
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
February 2018
DCS visibility, alarm management, motors and drives, robotic machining, Engineers' Choice winners
HMIs
Automation and controls continue to help HMI hardware and software advance. As computing capabilities progress, hardware has become more rugged with less maintenance required, with wider environmental capabilities, and integrated input/output (I/O) connections.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Machine Vision
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me