Industrial controllers integrate control functions, connect to the enterprise

Control system strategy: Industrial controllers can manage discrete control, motion control, and process control in one, integrated control platform. A backplane provides a high-speed communication path that allows multiple processors, networks, and IO devices to be mixed in one chassis, easing communications in the enterprise with industrial Ethernet.

05/24/2015


When designing controls, engineers can use multiple controllers: a programmable logic controller for discrete applications, a motion controller for motion applications, and a distributed control system for process applications. Or, with advancements in controller technology, these control functions can be managed in one integrated control platform. The technology advancement that made this possible was a backplane providing a high-speed communication path that allows multiple processors, networks, and input/output (I/O) devices to be mixed without restriction in one chassis.

Modern programmable automation controllers (PACs) use a producer/consumer model, which enables any device on the network to "produce" information for multiple "consumers," or devices. Producer/consumer communications directly embedded in the control backplane enable information to be passed simultaneously among any combination of controller, I/O, or communication modules in the chassis, offering seamless integration and faster communication speeds.

Ethernet impact

As the cost point for Ethernet continues to drop, original equipment manufacturers (OEMs) and end users will continue to drive Ethernet lower in the architecture. Until the smallest devices are affordable on Ethernet, OEMs are integrating device-level networks on the EtherNet/IP backbone to streamline configuration and maximize visibility into devices. EtherNet/IP Ethernet protocol is governed by ODVA. This approach creates visibility in the system and allows device-level diagnostics from a remote location.

An "Ethernet everywhere" approach also applies to motion control applications. EtherNet/IP, which uses standard Ethernet transmission control protocol/Internet protocol (TCP/IP), is fully capable to handle servo motion system requirements, including multi-axis synchronization and real-time data transmission. 

Real-time control

Standard Ethernet can deliver on the highest performance demands of coordinated motion-including multi-axis synchronization and real-time data transmission-as well as of the integration of plant information services, all on the same wire, at the same time. EtherNet/IP is the prime example of using unmodified Ethernet to meet the 100 axis/1 ms target for coordinated motion control across multiple controllers and multiple variable frequency and servo drives. Two technologies have been developed for EtherNet/IP to achieve this goal: CIP Sync (IEEE 1588 Precision Clock Synchronization mapped into the CIP object model) and CIP Motion (a set of application profiles designed to allow position, speed, and torque loops to be closed within V/Hz, vector, and servo control drives).

Curt G. Joa Inc., an OEM, leverages EtherNet/IP for a 150-axis machine, demonstrating the Ethernet protocol's ability for real-time data transmission.

Motion control can be placed anywhere in the infrastructure without physically isolating the traffic from other forms of traffic on the wire. In terms of traffic, it can be EtherNet/IP (where all network capabilities such as motion, synchronization, redundancy, and safety are available in all segments of the network) or nonautomation-related data streams, such as video surveillance, virtualization, collaboration and video conferencing, auto-identification and radio frequency identification (RFID), with subnets for logical sub-system isolation that are configured through virtual local area networks (VLANs). With other communication protocols, high-performance capabilities are isolated on a physically separate Ethernet network segment from the backbone Ethernet. 

Controllers, future-proof networking

Using standard Internet protocol (IP) network technology, EtherNet/IP offers the best pathway to a converged network architecture, helping manufacturers streamline control and information flow to achieve plantwide optimization.

- Paul Brooks is business development manager, Rockwell Automation; edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske@cfemedia.com.

Key concepts

  • PACs eliminate the need for separate discrete, motion, and process controllers. 
  • Controller design can enable multi-axis control.
  • Industrial Ethernet eases and widens communications and allows diagnostics.

Consider this

Could control platform simplification ease your control design challenges and lower lifecycle costs, while adding benefits such as diagnostics and more direct communications?

ONLINE extra

The "Ethernet everywhere" concept was explained in Control Engineering in a 1999 cover story. 

See related June 2015 Control Engineering article on controller selection below.



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me