Internet network group grows 50%; interoperability test event planned in March

Texas Instruments, National Instruments, Landis+Gyr join others in promoting use of Internet Protocol (IP) for sensor-equipped smart objects.

02/03/2009


Read more on smart objects, and machine to machine (M2M) communications
Cellular communications, machines communicate, machinery health

San Francisco, CA – The IP for Smart Objects (IPSO) Alliance has grown its membership by more than 50% since its formation by 25 founding companies in September 2008, adding Texas Instruments, National Instruments, Landis+Gyr/Cellnet and 10 other new members. The alliance says it has set an agenda of multi-vendor product interoperability tests for 2009, with the first test event scheduled for March.
The IPSO Alliance promotes the concept that the Internet Protocol (IP) is the networking technology best suited for

connecting sensor-equipped or "smart" objects

and delivering information gathered by those objects. Smart objects transmit information about their condition or environment (such as temperature, light, motion, health status) to locations where the information can be analyzed, correlated with other data and acted upon. They are used in factory automation, safety and industrial settings, asset tracking, automated homes and offices, hospital patient monitoring, and many other applications.
"Our first few months as an organization have yielded results exceeding our expectations," said Geoff Mulligan, IPSO Alliance chairman. "The 'Internet of Things' and the IPSO Alliance were included in Time Magazine's 50 'Best Inventions of 2008.' We've seen strong cross-industry participation from semiconductor makers, software companies and systems integrators. Most significantly, more... utilities and OEMs are viewing embedded IP as the long-term solution - and proprietary approaches and ad-hoc alliances as merely an interim step. They are recognizing that only IP can support a wide variety of networking technologies with the needed scalability and interoperability that organizations require."
IPSO is planning up to three large-scale interoperability test events in 2009. The first event, slated for March 4, will test end-to-end IP- based interoperability across the Internet via the next-generation IPv6 protocol over local (wireless or wired) and wide-area communication media. The event will demonstrate open international standards-based sensor networking solutions that deliver the global scalability, security, performance and flexibility needed for future applications.
The test site will be located in the San Francisco Bay Area, but, since IP is used virtually everywhere, companies anywhere on the globe can participate in the test as if they were at the local site.
Test events later in the year will include demonstrations of multi-vendor devices communicating within a sensor network using the IETF 6LoWPAN (RFC 4944) standard for IPv6 over low-power wireless personal-area networks. Each subsequent test will increase the scope of vendors and the diversity of media types (such as IEEE 802.15.4, Wi-Fi, Ethernet, WiMAX, and others) interoperating. Ethernet protocols are widely used in automation .
Mulligan also noted that other standards, such as ISA100 for industrial wireless sensor networks, are using embedded IP and 6LoWPAN formatting, and that more than a dozen embedded IP stacks are now available for Atmel, TI, Freescale, Jennic and Hitachi microcontrollers, along with a number of open-source stacks, some less than 20 kilobytes
in code size.
New members joining the IPSO Alliance since September 2008 include Centria, ELIKO, Ericsson, Gainspan, Kitworks, Landis+Gyr/Cellnet, Lulea University of Technology, Mocana, National Instruments, Primex, SmartSynch, Texas Instruments and TZ/Intevia.
Founding members are Arch Rock, Atmel, Cimetrics, Cisco, Duke Energy, Dust Networks, eka systems, EDF (Électricite de France) R&D, Emerson, Freescale, IP Infusion, Jennic, Kinney Consulting, Nivis, PicosNet, Proto6, ROAM, SAP, Sensinode, SICS, Silver Spring Networks, Sun Microsystems, University of Tampere, Watteco and Zensys.
IPSO Alliance says it intends to complement the efforts of the Internet Engineering Task Force (IETF) and the Institute of Electrical and Electronics Engineers (IEEE) , which develop and ratify technical standards in the Internet community. Membership is said to be open to any organization advocating an IP-based approach to connecting smart objects.

Also read from Control Engineering more about machine communications:


-Joint initiative to explore cellular solutions for industrial automation


-

M2M: When machines talk back, it is a good thing


-

Healthy Machines

– Edited by Mark T. Hoske , editor in chief
Control Engineering News Desk
Register here
.





Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me