Machine Safety: OSHA’s top 10 cited violations for 2013

Are you very aware of OSHA’s top 10 citations for 2013? Is this because of your excellent safety culture and organizational diligence? Or, is it because you’ve been cited by OSHA?

12/30/2013


OSHA top 10 violations for 2013Are you very aware of OSHA’s top 10 citations for 2013? Is this because of your excellent safety culture and organizational diligence? Or, is it because you’ve been cited by OSHA? It seems to me, "Here we go again!"

Does OSHA’s top ten list ever mix it up much at all? I’ve been watching this list fairly close for the past few years, and I can’t overtly state any significant changes. I think these standards move around a little but don’t they all pretty much fall into the top ten year after year?

The preliminary figures for the OSHA FY 2013 Top 10 are:

Standard Total Violations

1. 1926.501 – Fall Protection 8,241

2. 1910.1200 – Hazard Communication 6,156

3. 1926.451 – Scaffolding 5,423

4. 1910.134 – Respiratory Protection 3,879

5. 1910.305 – Electrical, Wiring Methods 3,452

6. 1910.178 – Powered Industrial Trucks 3,340

7. 1926.1053 – Ladders 3,311

8. 1910.147 – Lockout/Tagout 3,254

9. 1910.303 – Electrical, General Requirements 2,745

10. 1910.212 – Machine Guarding 2,701

Courtesy of OSHA: www.osha.gov/Top_Ten_Standards.html 

In my last few blogs on this subject I’ve indicated that several of these standards relate directly to machine safety, not only item #10 Machine Guarding. In November’s Control Engineering magazine on page 26, a short news article asks: “Were you on the OSHA top 10 list of violations?” The news story goes on to say: “OSHA violations related to machine safety include electrical and wiring methods (5), Lockout/tagout (8), electrical (9), and machine guarding (10)." This mixes the order up a bit, but I recall these same four violations reported in previous years. There were 27,186 total violations in 2012, and 42,502 violations in 2013. So, doubling the number of OSHA reported violations has little direct impact in the types of violations.

My take away is as follows: we’ve still got a lot of work to do if we truly want Machine Safety to not be reported in OSHA’s top 10 list of violations. What is your take away?

Please use these blog posts for advance your machine safety efforts. Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety: OSHA Top 10 Violations for 2012

 

Machine safety pays off – by JB Titus

 

Machine Safety – does OSHA reference consensus standards for compliance?

 

Machine Safety: Is OSHA okay with my 'acceptable' risk mitigation?

 

Integrated Safety Systems: Ensuring Safety and Operational Productivity - by the Aberdeen Group

 

OSHA – search for near miss

 

 

Contact: www.jbtitus.com for “Solutions for Machine Safety.”



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
February 2018
DCS visibility, alarm management, motors and drives, robotic machining, Engineers' Choice winners
HMIs
Automation and controls continue to help HMI hardware and software advance. As computing capabilities progress, hardware has become more rugged with less maintenance required, with wider environmental capabilities, and integrated input/output (I/O) connections.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Machine Vision
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
February 2018
DCS visibility, alarm management, motors and drives, robotic machining, Engineers' Choice winners
HMIs
Automation and controls continue to help HMI hardware and software advance. As computing capabilities progress, hardware has become more rugged with less maintenance required, with wider environmental capabilities, and integrated input/output (I/O) connections.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Machine Vision
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
February 2018
DCS visibility, alarm management, motors and drives, robotic machining, Engineers' Choice winners
HMIs
Automation and controls continue to help HMI hardware and software advance. As computing capabilities progress, hardware has become more rugged with less maintenance required, with wider environmental capabilities, and integrated input/output (I/O) connections.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Machine Vision
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me