Machine Safety: We haven’t finished assessing cloud computing; here comes the fog

Cloud computing has been discussed by all the big guys (Microsoft, Apple, Cisco Systems, IBM, Google, Facebook, HP, Sony, etc.) for several years. Some suppliers have already developed hardware products that only store data in “the cloud.” And, machine safety experts have begun assessing how, or even if, “the cloud” can play any role in providing machine safety.

07/08/2014


Machine safety experts have begun assessing how cloud computing can play any role in providing machine safety. What about fog computing? Courtesy: Control Engineering Machine Safety Blog, J.B. TitusMicrosoft, Apple, Cisco Systems, IBM, Google, Facebook, HP, Sony, and other "big guys" have been talking about cloud computing for several years. Some suppliers have already developed hardware products that only store data in “the cloud.” And, machine safety experts have begun assessing how, or even if, the cloud can play any role in providing machine safety. So, what is this noise about “the Fog”?

Cloud computing advantages, risk

Cloud computing and data storage have distinctively significant advantages as the world grows more data centric. One major advantage of the cloud is to push one company’s data and software into some other company’s data center. This advantage certainly addresses a data center’s efficiencies and capacity issues cost effectively. However, a company’s costs could sky rocket if a cloud based data center is disrupted. I suspect that these and other issues are still in the process of being worked on as well as the development of any safeguarding designs as required by IEC 61508-1 for any potential machine safety-related functions. It’s my opinion that, as a minimum, any role performed by the cloud in supporting machine safety applications will require compliance to IEC 61508-1 and perhaps other safety standards also.

What is “the Fog”?

On May 18, The Wall Street Journal published an article; "Forget 'the Cloud;' Computing’s Future Lies in 'the Fog,'" written by Christopher Mims. Mr. Mims’ article does a good job of describing the fog based in part around a limiting factor of “the Cloud” being 3G and 4G networks. This discussion boils down to a term called bandwidth, which is a significant limitation for “big data.” Essentially, a computing fog is cloud computing close to the ground. Mims describes the fog as follows: “Stop focusing on the cloud, and start figuring out how to store and process the torrent of data being generated by the Internet of Things (also known as the Industrial Internet) on the things themselves, or on devices that sit between our things and the Internet.” He goes on to describe more details, yet this is a convenient spot to address machine safety. We have today a rapidly growing presence of smart devices inside the walls of manufacturing. Such devices as; cableless operator panels, tablets, smart phones, lap top computers, wireless sensors… and many more.

Cloud, fog, and safety

Some of these devices already have safety devices and/or safety functions. All of these smart devices can be considered members of the Internet of things. They have computing capability, and they are targets of inclusion (my words) in the fog. It makes sense for the fog (as with the cloud to be compliant with relevant safety design standards for use in machine safety-related functions?

Now, big thinkers as we are, consider the cloud and the fog as community versus autonomous. My investigation into these developments reveals that the fog is actually an extension of the cloud, a place where time-sensitive data storage, computing and networking can occur without burdening the processing of big data in the data centers within the cloud. Therefore, it makes sense that machine safety-related functions should evolve over time as part of these new developments. This could present challenges and opportunities.

How do you think cloud or fog-based resources can augment machine safety? Do you have questions about machine safety for future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety: enhanced safety networks, the Internet of things, and autonomous safety

Forget “the Cloud;” Computing’s Future Lies in “the Fog,” written by Christopher Mims, The Wall Street Journal

Fog Computing and Its Role in the Internet of Things, written by Flavio Bonomi, Rodolfo Milito, Jiang Zhu and Sateesh Addepalli, Cisco Systems Inc.

Machine Safety: Industry 4.0 and how it could impact machine safety

See an additional Control Engineering article about fog computing, linked below.

Contact: www.jbtitus.com for “Solutions for Machine Safety.”



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me