Magnetic levitation for PCB production

A combination of linear drives and magnetic levitation can be used to alleviate particulate contamination on printed circuit boards’ (PCB) production lines, explained Paul Streatfield of Bosch Rexroth, for Control Engineering Europe.

08/09/2015


Courtesy: Control Engineering EuropeWhen manufacturing semi-conductors and microchips used in printed circuit boards (PCBs), particle contamination can dramatically increase production costs and reduce the operational life of an end-product.

The production of semi-conductors and microchips requires an ultra-clean production environment, such as an inline vacuum deposition process. However, contamination can occur even in such conditions.

Tiny particles are generated by metal-to-metal, or metal-to-grease, contact inherent in conventional methods of inline transport, such as chain drives or conveyor belts with linear motors.

A typical layout includes a vacuum-sealed process chamber with the carrier inside a vacuum. The problem with this method is that the bearings are also inside the vacuum, which immediately results in metal-to-metal contact and the potential for particle ingress.

Particles are not the only problem with this type of production as, in addition, it is neither scalable nor flexible which means that increases in demand cannot be quickly accommodated, and the line will need extensive service and maintenance.

A move away from any touching of components during the manufacturing process would help to improve product quality as well as the cost of production.

One potential solution, that is currently being tested, is magnetic levitation. For example, combines inverted linear motion technology with a contactless transportation system. With a standard linear motor system, there is one moving coil with the motion controlled by the switching of the current which activates the magnet. The carrier is then driven down the production line. 

Air-gap alternative

The alternative method currently being tested is the use of an inverted linear motor with magnets under the drive carrier and the coil units mounted outside the process chamber. Such a system adds large air gaps between magnets and the carrier, which levitates above the permanent magnet tracks.

In addition, a position sensor, consisting of two hall sensor elements, controls the exact location of the carrier. Magnets moving over the sensor create a sinusoidal wave with the sensors spaced to ensure the phase difference is 90-deg. Interpolation of the signals gives the exact carrier position.

The carrier is also equipped with an automatic alignment procedure and carrier control that offers full degrees of movement on five axes, including pitch, roll, and yaw. This type of system has two advantages. First, a series of coils can be constructed and up to 32 carriers can be used rather than just one carrier with the standard linear motor. Second, with the coils mounted underneath the carrier, any ingress particles fall away from the carrier rather than onto the carrier, which improves product quality. The inverted linear motor has no active parts. With bearings located in fixed positions there is much less potential for particle ingress.

This method has no friction or wear, and the movement of the carrier is contactless and clean, without particle generation or lubrication. This method of transport also eliminates bearing-related disturbances, such as sticking, slipping, or fluctuating stiffness. Additionally, only passive or sealed components are located in the process chamber, which leads to lower maintenance costs and a lower cost of ownership. 

Motion control

The combination of linear motion and magnetic levitation also offer operational benefits with high-speed, high-positioning accuracy with constant speeds and low ripple. Testing has already shown excellent planarity over long transportation distances with an automatic alignment procedure in the bearings' air gap. In terms of production throughput, the carriers can achieve speeds of up to 5 cm/sec and can carry loads from 1 to 1,000 kg (about 2,205 lbs). The carriers are also capable of repeat positioning of 10 to 20 µm along with high-positioning accuracy and minimal velocity ripple.

This combination of drive system and magnetic levitation is still being tested, but it has already gained significant interest from electronics manufacturers because of its potential to solve the issue of particle generation which has dogged semi-conductor and microchip manufacture for many years.

- Suzanne Gill is editor of Control Engineering Europe. Edited by Joy Chang, digital project manager, Control Engineering, jchang@cfemedia.com.

ONLINE extra

See additional stories from Control Engineering Europe linked below.



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
October 2018
HMI hardware evolution, Data acquisition strategies, Matching motors and drives, Machine vision advice
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
October 2018
HMI hardware evolution, Data acquisition strategies, Matching motors and drives, Machine vision advice
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
October 2018
HMI hardware evolution, Data acquisition strategies, Matching motors and drives, Machine vision advice
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me