Manufacturing: More motors shipped, 14% DCS growth, RFID expansion

Motors, distributed control systems (DCS) and radio frequency identification (RFID) are growth markets to watch, according to National Electrical Manufacturers Association (NEMA), ARC Advisory Group, and IDTechEx RFID Knowledgebase.

08/07/2007


Rosslyn, VA, Dedham, MA, and Cambridge, UK Motors, distributed control systems (DCS) and radio frequency identification (RFID) are markets to watch these days, with growth trends that range from modest to “unprecedented,” according to several current reports.

Motor shipments edged up in the second quarter of 2007 as demand for integral and fractional horsepower motors grew for the second consecutive quarter, according to the National Electrical Manufacturers Association (NEMA) . The NEMA Motors Shipments Index, which rose 2.8% on a quarter-to-quarter basis in the second quarter, suggests that gains in demand growth on a year-over-year basis remain modest, citing a 0.1% gain in the topline index compared to Q206. The index, showing an increase of 56% from its nadir during the last economic downturn, is a composite measure of NEMA-member companies’ U.S. shipments, using data drawn from NEMA statistical surveys adjusted for inflation and seasonal fluctuations, the organization says. Following a notable slowing in the first quarter, presenting a gain of only 0.6% on an annualized basis, macroeconomic growth figured in at 3.4% in Q2. In spite of slow housing starts, recent data reports business adding to stockpiles after several quarters of depletion. Another factor is cash-rich companies following what is referred to as “an unprecedented run for corporate profitability.” While integral horsepower motors are expected to achieve modest gains in the future, end-market conditions are less positive for fractional horsepower motors and are expected to remain a limiting factor to new gains in the topline index, says NEMA.

Meanwhile, the DCS market increased growth by more than 14% from 2005 to 2006 and the prediction is for a healthy growth pattern through 2011, according to a recently released ARC Advisory Group study. There are indications that growth may approach 2005-06 levels, but will probably not exceed them. The ARC sees the current growth phase of the worldwide automation market continuing through the next few years, with “signs of sluggishness” in North American and Western European markets. Asia, the Middle East, Eastern Europe and Latin America are tagged as areas where opportunities should abound. Among the ARC’s findings are that services remain the number one growth business for automation across the spectrum of the plant lifecycle and the scope of almost all automation products and applications. Additionally, fieldbus solutions are being deployed in increasing numbers as they become increasingly accepted in a broader range of industries and by a larger number of end users. In some cases, fieldbus is becoming a corporate standard for manufacturers, ARC says. Another observation in the study is that Asia continues to drive the global market as China and India are positioned for substantial long-term growth, revving up manufacturing for more exports, developing infrastructure, investing in basic industries, and bringing personnel up to speed to run plants. ARC predicts China will be the single biggest geographical market for automation products and services in 20 years.

Another notable trend is the rapid adoption of RFID in manufacturing and logistics. The IDTechEx RFID Knowledgebase of 2,959 projects in 98 countries reports that manufacturing and logistics have risen to become 17.2% of all projects. In China, that comes to 26.3% of all projects. The adoption of RFID is taking new forms. For instance, ubiquitous sensor networks with fault-tolerant ZigBee networking are in trial for asset management. Dr. Chang-Hun Lee of the National Information Society Agency in Korea predicts “Ubiquitous Sensor Networks will be a huge RFID market in a few years.” A broad range of case studies from the Knowledgebase indicates that RFID uses across the globe are proliferating and that the IDTechEx RFID Europe conference (Cambridge, UK, September 18-19, 2007) will reflect these significant developments.

Note: Also see the
ROI in RFID Webcast from Modern Materials Handling and
What’s RFID Spin?
, a cover story from Control Engineering .

Edited by Barb Axelson , contributing editor
Control Engineering Weekly News
(

Register here

and scroll down to select your choice of eNewsletters free

.)





Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me