Maximizing a control system's lifestyle

Virtualization is a great way to maximize the life of overall system.

06/21/2017


If a control system is at the end of its lifecycle and can't afford the time or expense of an upgrade to the whole system, there are some things that can be done in the interim to increase the longevity of your aging system. Whether this is a new installation or a legacy system, many of these tips are useful independent of a control systems' age.

In most cases, a control system consists of much more than a few programmable logic controllers (PLCs). There are controllers, input/output (I/O) cards, a network infrastructure, gateways or interface devices to allow data to flow between systems, and human-machine interface (HMI) software applications or proprietary consoles.

In an effort to maximize the lifecycle of a system, it's important to have good preventative maintenance plans, but you also need a plan for managing the dependence on aging components and software, which are essential to operation.

Control system maintenance tips

As a whole, keeping up with control system releases and properly maintaining it over the entire lifecycle is essential to ensuring the reliability and continuous operation of a system. This is an exercise to thwart the rigorous demands of time, manufacturing, and production schedules.

Control system power

Good, reliable, and clean power is a must. This is essential to maintain longevity. Nothing stresses power supplies more than brownouts which lead to premature failure of components. Power surges are another big power supply killer. It's always a recommendation to install an uninterruptible power system (UPS) and run the critical components from it.

Environment

Keep tabs on your environment means factoring in temperature, humidity, and dust. Controlling the temperature and humidity around the components in the control system is critical. The warmer the cabinet, the shorter the life of the components inside (above a threshold temperature.) This applies to computers as well. Most computers are designed to operate at an ambient temperature of no more than 80°F. As you go above that temperature, there is not enough physical cooling capacity to keep the components below the design temperature, which will lead to failures.

The same issues can occur with dust accumulation, as dust can act as an insulator, keeping the cooling air from properly removing heat.

  • Ensure enough space for adequate airflow for PCs
  • Ensure that the server cabinets have enough air flow and are in environmentally controlled rooms. Humidity should also be controlled (this may require external cooling such as fans or an air conditioner.)
  • Proper control cabinet design with recommended spacing for components (this includes duct spacing around components) and heat dissipation (this may require external cooling such as fans or an air conditioner.)
  • Keep components free of dust and dirt. The use of good filters and a preventative maintenance schedule to replace filters is a must.

Network

The backbone of the control system is the network. This is often the most crucial and overlooked portion of the system. The data has to make it from the processors to the server/HMI so it can be controlled. More and more systems are adopting Ethernet as the go-to choice for control of distributed components. Variable frequency drives, valve banks, remote I/O, etc., are all reliant on a solid network. In most cases, it makes sense to make this as robust as possible. You should explore layout topologies, distributing loads, and fault tolerance using multiple links and switches.

Keeping up with the Joneses

Every control system has a life span, and computers should typically be replaced every 5 to 6 years and controllers/hardware should be replaced as needed (while still available). For the most part, keeping up to date involves upgrading your computers and the control software. If you follow the latest and greatest version of software supplied by your vendor, you will probably be upgrading PC's more often due to enhancements and functions offered on the newer operating systems which usually don't support the older hardware.

Replacing computers seems like a trivial process, but with each passing year, a new operating system pops up and an old one is no longer supported. Additionally, since older operating systems may not support the new hardware, this means you're forced to go to the newer operating system and upgrade your control software for your DCS or PLC systems. Depending on how many versions of the software you are behind, this could be a really big deal.

It's not all doom and gloom, but there are some tools you can utilize to get by until you're ready to make the big switch.

Virtualize

In most cases, it's possible to virtualize the old system, which would allow you to limp by until a final solution is in place. This works well if you have good control hardware and need an immediate solution to your HMI PC replacement problems. An example would be if you're still running Process Suite on an old Windows 2000 machine or RSView32 on Windows XP.

Phased replacement

Replacement often consists of updating the HMI software to a package that works with your existing and new hardware, such as using PCS7 APACS OS where you still have your old ACM's but need a new HMI to replace Process Suite. Now you can replace hardware as part of a phased approach, running the new and old systems side-by-side on the new HMI software until the upgrade is complete and you have all new hardware. This removes the vulnerability of the old outdated computer hardware running legacy operating systems.

The value of planning ahead

One indication that you are in jeopardy is if you're buying hardware off of E-Bay. All control system vendors have a product life-cycle model which defines a phased approach for support of their hardware/software. If you don't know what the lifecycle is of your current systems or if you don't know where you're at in the lifecycle, then you are already behind the curve.

Several years prior to when a control system is set to be discontinued, you should begin the process of planning your next steps to ensure you minimize the potential for production outages. Most vendors offer migration paths for nearly every system. Some migrate effortlessly while others are much more involved, requiring a re-write of the code for the new controller. It often depends on where you are in your lifecycle and tools that are offered by the vendor as to how difficult the upgrade process will be.

Looking into the future, it's hard to predict what will happen with computers, operating systems, hardware, and networking components. Virtualization is a great way to maximize the life of your overall system, opening up the door for added flexibility. You are able to move your virtualized machines from one piece of hardware to the next with reduced effort or downtime.

Using thin-clients is also a great way to help minimize the impact of replaced hardware because these are independent of operating systems. A very efficient approach to lifecycle management is to couple virtualization of the operating system along with thin-client technology for operator workstations. First, this is a popular choice that decouples the control system from computer operating system so you are not chasing software compatibility like the IT departments. Second, the thin-clients allow for easy replacement with small costs compared to replacement of actual computers and time needed to reinstall the software.

In summary

Extending the lifecycle of your control system and squeezing the investment out of production system assets requires proper maintenance but, just as important, it requires lifecycle management practices. This means knowing where you are in your hardware/software lifecycle and having a plan to minimize production outages to allow the assets to continue to meet production schedules.

Both of these elements help reduce the risk of potentially having an unplanned outage, which could be detrimental to your business or at the very least costly. Taking advantage of good maintenance practices and proven technology like virtualization can extend the life of your system, decrease disaster recovery time, lower the overall total cost of ownership, and ultimately reduce the risk of unexpected downtime.

David Ward, integration/energy management engineer, Cross Company Integrated Systems. This article originally appeared on Cross Company's website. Cross Company is a CFE content partner. Edited by Hannah Cox, content specialist, CFE Media, hcox@cfemedia.com.



The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Factory automation controllers, Ethernet updates, System Integrator of the Year roundtable, Inside Process and VFDs
Robotic simulation and welding, Process building blocks, Discrete sensor advice, Virtualization advice
Maximize ROI with integrated control system approach; Microcontrollers vs. PLCs; Power quality; Accelerate and rewire IIoT; Traits for excellent engineers
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Factory automation controllers, Ethernet updates, System Integrator of the Year roundtable, Inside Process and VFDs
Robotic simulation and welding, Process building blocks, Discrete sensor advice, Virtualization advice
Maximize ROI with integrated control system approach; Microcontrollers vs. PLCs; Power quality; Accelerate and rewire IIoT; Traits for excellent engineers
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Factory automation controllers, Ethernet updates, System Integrator of the Year roundtable, Inside Process and VFDs
Robotic simulation and welding, Process building blocks, Discrete sensor advice, Virtualization advice
Maximize ROI with integrated control system approach; Microcontrollers vs. PLCs; Power quality; Accelerate and rewire IIoT; Traits for excellent engineers
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me