Motion system integration, 3 overlooked points

Tips and Tricks: Control Engineering asked what engineers overlook when doing motion system integration. Pay attention to mechatronics, scalability, and the advantages of using one automation architecture.

03/23/2012


What are the top three points engineers overlook in motion system integration? Three overlooked areas involve mechanical and electrical integration (mechatronics), scalability, and using one architecture for motion system integration.

1. Mechanical and electrical integration: Many engineers cannot justify the time required to invest in properly right-sizing system components during mechanical integration. But over- or under-sized components can add unnecessary expense and reduce system performance, both immediately and in the long term. For example, machine builders often don’t discover if a motor provides the precise power required for an application until commissioning. Going back at this point to choose a new motor is costly and time-consuming, so machine builders tend to select a product that has too much power rather than too little. However, too much power increases costs, as more powerful motors are more expensive to purchase and can impact an application’s dynamic performance requirements. Additionally, larger motors use more power, increasing energy costs throughout the life of the machine.

Motion Analyzer software links SolidWorks and RSLogix 5000 together, helping save time and money by moving profiles and calculating inertia, torque, force, and axis tuning gains to appropriately size and select motors and drives. Courtesy: Rockwell Automa

Finding the right-sized motor in a virtual environment allows machine builders to cost-effectively and quickly optimize system performance and energy efficiency. Software tools are available to help.

RSLogix 5000 and SolidWorks programs coordinate system properties using Delta 3-D. Courtesy: Rockwell Automation

2. Scalability: Traditional architectures require separate control infrastructures for most factory automation applications, including safety, motion, and process control. This creates unnecessary complexity because each platform has a unique design environment, user interface, and vendor support model. The new, modern approach to control helps machine builders standardize on one control architecture and leverage a common application programming and configuration environment. This standardization helps improve design flexibility, providing the ability to scale the control system up, down, or across applications to meet a range of needs.

A screenshot of Motion Analyzer software shows selected motors that meet exact application performance needs. Courtesy: Rockwell Automation

3. Single, open network architecture: In the past, motion applications required their own dedicated network. Any engineer looking to integrate motion is probably all too familiar with the hassles of multi-tiered network strategies, from communication issues to massive amounts of cabling. But don’t stop at integrated motion. By replacing a multi-tier networking strategy with one standard network architecture, machine builders and manufacturers can reduce their engineering, commissioning, and deployment time and integration risks.

A screenshot of Motion Analyzer software shows velocity data in a cycle profile. Courtesy: Rockwell Automation

Whitney is commercial program manager - Integrated Architecture, Rockwell Automation. Edited by Mark T. Hoske, CFE Media, Control Engineering content manager.

http://ab.rockwellautomation.com/Drives/Software

http://controleng.com/motors



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
November 2018
Reliable wireless operations; PID tuning tips; Process control data quality; Cyber protection and integration
October 2018
HMI hardware evolution, Data acquisition strategies, Matching motors and drives, Machine vision advice
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
Material Handling
This article collection focuses on how modern supply chain must run at warp speed, and how the tools available—from conveyors and robots to automatic picking systems and digital orders—have evolved to keep pace with the speed of change.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
November 2018
Reliable wireless operations; PID tuning tips; Process control data quality; Cyber protection and integration
October 2018
HMI hardware evolution, Data acquisition strategies, Matching motors and drives, Machine vision advice
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
Material Handling
This article collection focuses on how modern supply chain must run at warp speed, and how the tools available—from conveyors and robots to automatic picking systems and digital orders—have evolved to keep pace with the speed of change.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
November 2018
Reliable wireless operations; PID tuning tips; Process control data quality; Cyber protection and integration
October 2018
HMI hardware evolution, Data acquisition strategies, Matching motors and drives, Machine vision advice
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
Material Handling
This article collection focuses on how modern supply chain must run at warp speed, and how the tools available—from conveyors and robots to automatic picking systems and digital orders—have evolved to keep pace with the speed of change.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me