NIST tests wireless systems; ISA pursues standard

According to the National Institute of Standards and Technology (NIST), recent tests verify that heavy industrial plants are challenging environments for wireless systems. Partnering with the U.S. Council for Automotive Research (USCAR), NIST has addressed what it refers to as a “nebulous problem.” In other wireless news, ISA continues to pursue a multi-protocol standard.

09/11/2007


Washington, DC, and Research Triangle Park, NC —According to the

National Institute of Standards and Technology (NIST)

, recent tests verify that heavy industrial plants are challenging environments for wireless systems. Partnering with the U.S. Council for Automotive Research (USCAR), NIST has addressed what it refers to as a “nebulous problem.” In other wireless news, ISA continues to pursue a multi-protocol standard.

Heavy industrial plants, such as auto production plants, can be highly reflective environments, scattering radio waves erratically and interfering with or blocking wireless transmissions. Electromagnetic interference may hinder the auto industry and other sectors in the use of wireless networking.

NIST will develop a statistical representation of the radio propagation environment of a production floor as a basis for developing standards to pre-qualify wireless devices for factories. Initial tests at an auto assembly plant were performed last month. In September, testing took place at an engine and a metal stamping plant.

These plants were crowded with stationary and mobile metal structures– fabrication and testing machinery, platforms, fences, beams, conveyors, mobile forklifts, maintenance vehicles, and automobiles in various stages of production. Frequencies below 6 GHz were monitored for 24-hour periods to understand the background ambient radio environment. The spectrum surveyshowed that interference from heavy equipment can impair signals for low-frequency applications such as those used in some controllers on the floor. A detailed analysis of a common wireless local area network (LAN) frequency band was performed. Signal-scattering tests showed potential for high levels of multipath interference.

NIST reported that its researchers have identified steps to minimize radio interference on the factory floor. These include the use of licensed frequency bands, where possible, and restrictions on the use of personal electronics in high-traffic frequency bands, as well as the installation of absorbing material in key locations, use of wireless systems with high immunity to electromagnetic interference, use of equipment that emits minimal machine noise, and use of directional antennas to help mitigate multipath interference when transmitters and receivers are close to each other.

The work is part of a larger NIST / USCAR collaboration established in 2004.

In other news, the

Instrumentation, Systems, and Automation Society (ISA)

reported its ISA-100, the “Wireless Systems for Automation,” standards committee is at work to develop a family of wireless standards. During a recent meeting in Vancouver, Canada, the ISA-100.11a Principles of Operation were affirmed by all task groups for release to the committee for review and comment; the schedule also was reaffirmed.

The brief, non-detailed overview of draft ISA-100.11a was written as a “cohesive overview and summary of the individual task group resolutions at this point.” Details of operation are not present in the document; details will be defined later in the draft standard document.

According to ISA-100 chair Wayne Manges of Oak Ridge National Labs, there was tremendous user support at the meeting. “This standard is for the end user, so the more end user input we have, the better our standard will be,” he said.

Jim Reizner, section head of corporate engineering at Procter & Gamble, added that he was extremely happy with the way the editorial team dealt with “contradictory requirements of systems that offer options, flexibility, and differentiation among vendors and the end-user desires.”

The standard is intended to provide reliable and secure operation for non-critical monitoring, alerting, supervisory control, open loop control, and soft closed loop control applications. It defines the open systems interconnection (OSI) stack, system management, gateway, and security specifications for low data rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements. The standard is set for release early next year.

The committee has scheduled an interest meeting during

ISA Expo 2007

(Oct. 2-4) in Houston. A multi-vendor technology demonstration will showcase the major principles of operation of the committee's work, and products from more than 15 vendors are expected to beicited at the meeting to form interest groups for each family of standards.   

—Edited by Barb Axelson, contributing editor
Control Engineering Weekly News
(

Register here and scroll down to select your choice of eNewsletters free

.)





Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me