Online learning events: Automation Summit, pump efficiency, fieldbus, industrial Ethernet

Multiple online learning events are available through CFE Media publications, including industrial Ethernet installation optimization, the Manufacturing/Automation Summit, webcast on pump and process efficiency, and fieldbus, among others. See more information and links to register, below.

10/08/2011


Multiple online learning events are available through CFE Media publications, including the Manufacturing/Automation Summit, webcast on pump and process efficiency, fieldbus, and industrial Ethernet, among others. See more information and links to register, below.

Industrial Ethernet: Application Optimization
Friday, October 7, 2011, and now available on demand.
Register by clicking here.

What do you need to consider to optimize your next industrial Ethernet implementation? Depending on project scope and needs, you may be able to do this without relying on IT experts. This Control Engineering Webcast, sponsored by Beckhoff Automation, Moxa, and Phoenix Contact, will look at several important topics of consideration:

• Why was Ethernet chosen instead of another industrial network?
• What Ethernet protocol do you need and why?
• What are the Ethernet security considerations involved?
• Are multiple protocols used on the same Ethernet physical layer?
• What hardware architecture and topologies are needed and why?
• What should be included in your return on investment calculation?
• Should you use fiber or copper?
• What other networks are connected, how, and for what use?

Participants are:

• Joey Stubbs, PE, PMP, EtherCAT Technology Group North America

• Dan Schaffer, Network & Security Specialist, Phoenix Contact

• Jim Toepper, Product Marketing Manager, Industrial Ethernet Infrastructure, Moxa

• Mark Hoske, Content Manager & Moderator, CFE Media

Sponsored by: Beckhoff Automation, Moxa, and Phoenix Contact

Get more information about the Industrial Ethernet: Application Optimization webcast or register here.


Virtual/ Manufacturing Automation Summit
September 8, 2011, 9:00 a.m. CST (and archived afterward for on-demand viewing)

Click here to register. 

Virtual Manufacturing/Automation Summit, Control Engineering, Plant Engineering
Join Plant Engineering and Control Engineering for CFE’s 2nd annual Manufacturing/Automation Summit, a live virtual event with a focus on maintenance, systems management and safety. The 2011 Manufacturing/Automation Summit highlights content-rich agenda delivered by manufacturing’s top experts from companies such as General Motors and DuPont. This event is hosted by the editorial teams of both Control Engineering and Plant Engineering and offers a unique learning opportunity for manufacturing professionals by providing unprecedented access to some of the industry’s most forward thinking executives.

The Summit takes on some of manufacturing’s biggest challenges and delivers must-have how-to information on the key issues they face daily:

  • Energy and Sustainability
  • Maintenance as a cost center
  • Automation integration
  • Global strategies for manufacturers
  • Presentation of the latest study, The Changing World of the Plant Engineer

Register Today!


Unthrottle Your Profits: Tips for Boosting Pump Efficiency, Reliability and Process Control
Thursday, Sept. 15, 2011 at 2 p.m. EDT/1 p.m. CDT/11 a.m. PDT

All registrants are qualified to receive 1 professional development hour (PDH) or .1 continuing education unit (CEU) after passing a short exam.

Click here to register.

As electricity costs rise, many industrial plants are implementing energy management software and efficiency programs to reduce costs. But managing energy use is only part of the equation for improving efficiency. Process pumps are the biggest consumers of energy in most plants -- and every watt of power wasted by oversized or over-throttled pumps is converted to heat and vibration that reduce equipment reliability. This Webcast will teach the basics of optimizing pump performance to achieve a triple benefit – lower energy costs, lower maintenance costs, and improved process control.

Plant Engineering Content Manager Bob Vavra will be joined by ITT experts on energy efficiency and equipment reliability, including Mike Pemberton, a member of the Hydraulic Institute who has edited industry guidebooks and led education efforts on pump optimization.

Supported by case studies from a variety of industries, Mike and his fellow presenters will give attendees practical, how-to advice for applying the efficiency formula to improve pump performance and bottom-line results, while benefiting the environment.

Presenters:
Mike Pemberton,  Manager of Energy Performance Services for ITT Goulds Pumps
Bob Vavra, Content Manager and Moderator, Plant Engineering

Who Should Attend:
• Plant Managers
• Engineering/Maintenance Managers
• Production/Maintenance Supervisors
• Maintenance/Reliability Engineers
• Purchasing/Accounting/Finance Managers

Key Take-Aways:
• Selecting the right-sized pump -- and why many are oversized
• The physical relationship between pump efficiency and reliability, and how that translates to maintenance costs
• Mechanical and digital options for improving pump efficiency, and how to determine which one works best
• Essential steps for improving process control

Click here to register.


Designing Your First FOUNDATION Fieldbus Installation
Thursday, August 25, 2011 at 2 p.m. ET/1 p.m. CT/11 a.m. PT

Register by clicking here.

You’ve decided to implement FOUNDATION Fieldbus, but how should you plan your first project? Chances are you aren’t going to retrofit an entire plant, but selected areas of your plant. We’ll lead viewers through the process and tell you where to get further information, training, and resources. We’ll cover the following:

•    Choosing an appropriate application
•    Segment design tools and best practices
•    How fieldbus changes device commissioning
•    Ancillary equipment (power supplies, terminators, grounding)
•    Training, education, and online resources

Presenters:
Larry O’Brien, Global Marketing Manager, Fieldbus Foundation
David Lancaster, PE, Certified Fieldbus Instructor
Peter Welander, Control Engineering Content Manager, CFE Media

Register today by clicking here.

 


See also:

http://www.controleng.com/media-library/webcasts.html

http://www.plantengineering.com/media-library/webcasts.html



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
June 2018
Discrete and process sensor fundamentals, autotuning controls, system integrator roundtable
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me