Space saver: Isolated dc/dc converter
| EUS34-096 fixed conversion ratio isolated converter from C&D Technologies features 2,250 V input-to-output isolation and up to 300 W output. |
Mansfield, MA —EUS34-096 fixed 5:1 conversion ratio isolated dc/dc converter from C&D Technologies is designed to power multiple downstream, non-isolated point-of-load converters in intermediate bus architecture (IBA) applications found in computer and telecommunications equipment. Device incorporates input-to-output isolation of up to 2,250 V dc, reportedly to achieve cost and space savings through the use of non-isolated POL converters instead of larger, more expensive isolated versions.
Module has an industry standard eighth-brick footprint and an input voltage range of 38 to 55 V dc. It delivers a maximum of 300 W at 48 V dc input and a minimum 240-W output at 38 V dc input at 55 °C and 200 lfm airflow. RoHS-compliant bus converter is 96% efficient.
EUS34-096 features a positive or negative-triggered primary side remote enable capability, and over-current and over-temperature protection with automatic restart. It is suitable for parallel operation to satisfy the requirements of higher power applications. Dimensions are 58.4 x 36.8 x 12.2 m; operating temperature range is -40 to 85 °C. Module meets the UL94V-0 flammability specification requirements and reports a MTBF of 1.3 million hours.
—Control Engineering Daily News Desk
Jeanine Katzel , senior editor
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.
