Using wireless for closed-loop applications

When considering wireless for control applications, including it in the system design early can prevent surprises during or after installation.

01/28/2016


When considering wireless for control applications, including it in the system design early can prevent surprises during or after installation. Courtesy: Phoenix ContactAutomation of industrial applications is becoming common throughout most industries. Users endeavor to maximize process efficiency and minimize costs. As technology evolves, engineers strive to find new ways to test and use automation to their advantage.

When it comes to controlling manufacturing processes, automation continues to be an enabler with a rapidly increasing influence. For example, wireless technology is a segment of automation that has matured over the period of about a decade. Although it was not considered appropriate for control at first, wireless has quickly evolved from sensor-only applications to closed-loop control.

A wireless system can become an integral part of a control system regardless of that system's architecture: central, distributed, or closed-loop control. However, before introducing wireless into a control application, the different wireless technologies—and how they can impact control applications—must be fully understood. 

Initial considerations

Before diving into a project that involves using wireless in control applications, taking time to think about what's ahead can prevent issues later on. The primary issues involve expectations of a wireless network, its criticality (use case), and actually choosing a wireless system—wisely. 

Expectations: When considering a wireless system for a control application, it is important to understand what the expectation of the wireless network is and to plan the system around those expectations. Wireless products are becoming faster and more reliable. However, many users expect a wireless product to function like a standard wire. There will always be a latency factor in a wireless system that a wire does not have.

This is a fundamental point to consider when designing a system. If this point is discussed during the design stage of a project, it is typically not an issue. The problem comes when latency is overlooked, which can create problems while trying to start up the system.

The wireless manufacturer can typically help guide the user on what to expect regarding latency. The system design engineer must determine if that latency is acceptable for the specific application. Typically, these latencies are not very large, but they must be a point of discussion when implementing a wireless system. 

Use case: Even with using wireless for control, there are different use cases for the wireless system. At a high level, they can be divided into two groups: critical and convenience.

With critical applications, the wireless link is being used to send critical real-time data. Typically, these data are deemed "critical" if they are time sensitive. If, for whatever reason, the wireless link is delayed or broken, the application process will be interrupted.

A convenience application is established when a wireless system is implemented to help make a control process more efficient but isn't necessarily critical to the application itself. An example of this is networking remote programmable logic controllers (PLCs) or control devices that were historically monitored by someone physically visiting them multiple times a day to take readings or recordings. A wireless system can eliminate that need, but if the link is lost, the local control can still run. 

Choosing a wireless technology: When adding a wireless technology to an application, it is important to know that no wireless technology fits every application. While some technologies may overlap in application scenarios, they have different attributes that allow them to fit well into different applications.

When determining which radio frequency (RF) technology is right for a specific application, there are three main criteria to examine: environment, connection medium, and data throughput. When examining environment, obstructions and other RF sources in the area and distance must be considered. As a rule-of-thumb, the lower the frequency, the less the RF energy is attenuated by air. Therefore, relatively lower frequency RF can travel farther and better penetrate obstructions. The frequency used also impacts data rates. At lower frequencies, the channel sizes used to send information are smaller. This in turn lowers the data rate into the kilobit per second (kbps) ranges.

Conversely at higher frequencies, the channel sizes are larger, allowing more data to be sent-typically in the megabits per second (Mbps) range. As wireless distances increase, lowering the operating frequency may be required. This in turn lowers the data rate. This change may affect the design of the system or application.

Last is the connection medium between the system devices and wireless module. This is important because not all wireless devices have all types of connection media. Some have strictly discrete input/output (I/O) connections, while others have serial or Ethernet connections. Still others have combinations of those. Before choosing a wireless product for a specific application, it is important to verify that the product being considered has the desired connectivity.

The aforementioned criteria can help users determine if wireless technology is a possibility in their applications. After these issues have been addressed, the next step is to determine how the control system works. There are different control architectures. Based on the architecture, some wireless technologies fit better than others.

With all control architectures, the communication still must be transferred by some medium. Historically, short distance connections have used various cable combinations routed through conduit to a centralized control point. The "tech-in-the-truck" concept has been employed for longer distances where cables cannot be run. Both of these types of networking can become very time consuming and costly, depending on the installation and manpower required. With wire and cable prices continuing to rise—and companies looking to make their processes more efficient—new ways of networking systems are being investigated. A growing trend in control applications is wireless communication. With wireless communication, companies can now reduce installation cost and time when networking devices, locations, and information that they previously could not. 


<< First < Previous Page 1 Page 2 Next > Last >>

Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers.
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
September 2018
Optimize controls via cloud software, ladder logic simulation, industrial wireless best practices
August 2018
Augmented reality and virtual reality education, autotuning PID control, cybersecurity advice, educating engineers
July 2018
Ladder logic best practices and object-oriented programming, safety instrumented systems, enclosure design issues and challenges, process control advice
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
Data Center Design
Data centers, data closets, edge and cloud computing, co-location facilities, and similar topics are among the fastest-changing in the industry.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, progressive cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me