Wi-Fi standards

Industrial wireless tutorials: Understand the IEEE Wi-Fi standards, what each standard provides, benefits of standardization, and Wi-Fi Alliance device certification.

08/29/2014


Wi-Fi standards were developed and are maintained by the IEEE, specifically the 802.XX working groups, for example: IEEE 802.3 describes Ethernet, 802.11 describes Wi-Fi, and 802.15 describes Bluetooth. Standardization has allowed the technology to flouriIn the beginning, wireless networking, like wired, had several different competing methods, using incompatible technologies and frequencies. Security was practically non-existent. Wireless was not considered seriously as a usable network technology. Market forces conspired to drive the technology toward standardization, which greatly increased its utility.

At the outset, let's understand that the standards discussed here define the protocols used at the physical and data link layers of the OSI model. All of the standards were developed and are maintained by the IEEE, specifically the 802.XX working groups, for example: IEEE 802.3 describes Ethernet, 802.11 describes Wi-Fi, and 802.15 describes Bluetooth. Standardization has allowed the technology to flourish and has eliminated problems associated with lack of interoperability. 

Wi-Fi device testing

The other player in the Wi-Fi industry is the Wi-Fi Alliance, which is responsible for testing Wi-Fi devices for compatibility with standards and certifying interoperability; the familiar "Wi-Fi CERTIFIED" logo is assurance the device conforms to interoperability and security standards.

The original Wi-Fi standard, or "Wi-Fi Prime" was issued in 1997 as IEEE Standard 802.11-1997. This standard defined the three original physical layer (PHY) specifications:

  • Frequency hopping spread spectrum (FHSS), now obsolete for Wi-Fi
  • Infrared (IR), now obsolete
  • Direct sequence spread spectrum (DSSS).

Major Wi-Fi standards

The data rates were 1-2 MBPS and operated in the 2.4 GHz ISM band regardless of what method was used. Following are the major standards that were subsequently developed:

  • 802.11a: Orthogonal frequency division multiplexing (OFDM) in the 5 GHz U-NII band allowing up to 54 MBPS
  • 802.11b: High Rate DSSS (HR-DSSS) in the 2.4 ISM band allowing up to 11 MBPS. 802.11b is backward compatible to 802.11.
  • 802.11g: OFDM in the 2.4 GHz ISM band, allowing up to 54 MBPS. 802.11g is backward compatible to 802.11b
  • 802.11n: High Throughput OFDM in both the ISM and U-NII bands, allows up to 450 MBPS with MIMO technology. 802.11n is backward compatible with 802.11g, b.
  • 802.11ac: Very High Throughput OFDM (VHT-OFDM) in the ISM and U-NII bands, allows an eventual throughput of 6 GBPS. 802.11ac is backward compatible with 802.11n, g, b.

Wi-Fi security amendment

A major security amendment to be aware of is 802.11i, which describes Robust Security Network Associations (RSNAs) and the methods to achieve same. This amendment specifies the mandatory use of CCMP-AES, or Counter Mode with Cipher Chained Message Authentication Protocol — Advanced Encryption Standard. (Wireless security will be covered in a later segment.)

There are also several other amendments to the standard that modify and enhance the behavior of compliant devices:

  • 802.11d: "World Mode" — automatically sets a radio to the proper local channels and power output
  • 802.11h: Defines Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) to avoid interference with radar or other services in the 5 GHz bands.
  • 802.11e: Addresses Quality of Service (QoS) requirements to mitigate latency issues in multimedia delivery over a WLAN
  • 802.11r: Defines parameters for roaming between access points in an Extended Service Set (ESS)
  • 802.11w: Defines robust management frames to prevent Denial of Service (DoS) attacks.

The amendments discussed above (with the exception of 802.11ac) were rolled into the 802.11-2012 standard, which is available for free download at the IEEE website.

Daniel E. Capano, owner and president, Diversified Technical Services Inc. of Stamford, Conn., is a certified wireless network administrator (CWNA) and writes posts for the Control Engineering blog, Industrial Wireless Tutorials.- Daniel E. Capano, owner and president, Diversified Technical Services Inc. of Stamford, Conn., is a certified wireless network administrator (CWNA). Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske@cfemedia.com.

ONLINE extras

www.controleng.com/blogs has other wireless tutorials from Capano on the following topics:

Wireless propagation fundamentals

Radio math

Radio antenna types

www.controleng.com/webcasts has wireless webcasts, some for PDH credit.

Control Engineering has a wireless page



The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
HMI effectiveness; Distributed I/O; Engineers' Choice Award finalists; System Integrator advice; Inside Machines
Women in engineering; Engineering Leaders Under 40; PID benefits and drawbacks; Ladder logic; Cloud computing
Robotic integration and cloud connections; SCADA and cybersecurity; Motor efficiency standards; Open- and closed-loop control; Augmented reality
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
HMI effectiveness; Distributed I/O; Engineers' Choice Award finalists; System Integrator advice; Inside Machines
Women in engineering; Engineering Leaders Under 40; PID benefits and drawbacks; Ladder logic; Cloud computing
Robotic integration and cloud connections; SCADA and cybersecurity; Motor efficiency standards; Open- and closed-loop control; Augmented reality
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
HMI effectiveness; Distributed I/O; Engineers' Choice Award finalists; System Integrator advice; Inside Machines
Women in engineering; Engineering Leaders Under 40; PID benefits and drawbacks; Ladder logic; Cloud computing
Robotic integration and cloud connections; SCADA and cybersecurity; Motor efficiency standards; Open- and closed-loop control; Augmented reality
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me