10 Truths of Safety Instrumented Systems - Truths 7-10


10 Truths of Safety
Instrumented Systems



September 19, 2007

In continuation of the 10 Truths of SIS.

This newsletter we address Truths 7-10

Follows is a summary of each Truth, click on a topic for more information or go to www.triconex.com/10truths to view all Truths of SIS .

Truth 7
Dual SIS Technologies do not cost less than TMR; they almost always cost more.
Many companies advertise their Dual SIS technology as a lower-cost alternative to Triple
Modular Redundant options that offer equivalent performance. This is an unfortunate misrepresentation
of the capabilities of Dual SIS architectures. Dual PLCs in a 1oo2 (1 out of 2) configuration
were the initial solution of choice for "fail safe" applications, but they cannot overcome
an inherent problem with false trips.

Truth 8
SIS vendors advertise their TÜV Certification, but rarely tell you about their implementation
and operational restrictions.
Most safety system vendors focus on how the system
performs when it is healthy, but don't talk much about what happens when an internal failure
is diagnosed; worst case, the entire system shuts down. Each SIS vendor must provide clear
information on factors that might impair system performance, such as the system's implementation,
specific programming or configuration requirements, module or architecture choices,
and operational restrictions.

Truth 9
Given a choice, the implementation and installation of your SIS should not be entrusted
to strangers.

Choosing an SIS implementor can be as important as choosing the product itself. No matter how well the system is designed or manufactured, failures are likely to occur if the implementation team is not following proper procedures, is not experienced, or lacks adequate technical qualification for the tasks they must perform.

Truth 10
Maintaining a SIS is more than pulling data; the system also requires context to make
informed decisions.

SIS vendors should provide diagnostic tools with clear guidelines or recommendations for maintaining the system to maximize uptime in the context of plant operations.

Sponsored by:
Invensys Triconex www.triconex.com

Triconex 15345 Barranca Parkway Irvine California

Unauthorized use, duplication or distribution is strictly prohibited.
Invensys Legal Policy

Return to top

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Additive manufacturing benefits; HMI and sensor tips; System integrator advice; Innovations from the industry
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me