AC Induction Motor Designs, Types


W orldwide popularity of ac induction motors in numerous applications has led to some standardized motor designs. Concentration on a finite number of motor types also brings design and manufacturing efficiencies, while helping to achieve attractive pricing.

The National Electrical Manufacturers Association, (NEMA, Washington, D.C.) has developed specifications for so-called NEMA design A, B, C, and D motor types. These designs are based on standardizing certain motor characteristics such as starting current, slip, and specified torque points (see below). Here's a brief rundown on NEMA motor types:

  • Design A has normal starting torque (typically 150-170% of rated) and relatively high starting current. Breakdown torque is the highest of all NEMA types. It can handle heavy overloads for a short-duration. Slip &=5%. A typical application is powering of injection-molding machines.


  • Design B is the most numerous type of ac induction motor sold. It has normal starting torque, similar to Design A, but offers low starting current. Locked rotor torque is good enough to start many loads encountered in industrial applications. Slip &=5%. Motor efficiency and full load power factor are comparatively high, contributing to the popularity of the design. Typical applications include pumps, fans, and machine tools.


  • Design C has high starting torque (greater than previous two designs, say 200%), useful for driving heavy breakaway loads. These motors are intended for operation near full speed with-out great overloads. Starting current is low. Slip &=5%.


  • Design D has high starting torque (highest of all the NEMA motor types). Starting current and full-load speed are low. High slip values (5-13%) make this motor suitable for applications with changing loads and attendant sharp changes in motor speed, such as in machinery with flywheel energy storage. Several design subclasses cover the rather wide slip range. This motor type is usually considered a 'special order' item.

CE , July 1998, p. 94 provides an illustration of the comparative torque-speed characteristics of these motors. The diagram also shows graphically the following torque-speed points important to induction motor specifications. Locked-rotor torque (starting torque) refers to minimum torque generated with the rotor at rest, and rated voltage and frequency applied. Breakdown torque is maximum torque generated before an abrupt drop in motor speed occurs as rated speed is approached (at rated voltage and frequency). Pull-up torque is the minimum torque generated over the motor's speed range from rest to the speed point where breakdown torque is developed

Motors manufactured for European and international markets conform to a different set of designs and specifications. The International Electrotechnical Commission (IEC, Geneva, Switzerland) defines these design characteristics. One type of IEC induction motor is called Design N. This motor type has operating characteristics comparable to NEMA Design A and B motors.

AC induction motors are manufactured with a variety of protective housings to suit specific applications. Besides the enclosure types mentioned in the ' Back to Basics ' article, induction motors are available in still other housing varieties; for example chemical duty, washdown, and explosion proof types.


No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Controller programming; Safety networks; Enclosure design; Power quality; Safety integrity levels; Increasing process efficiency
Additive manufacturing benefits; HMI and sensor tips; System integrator advice; Innovations from the industry
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me