Load points and sensors

San Diego, Calif.— Advantage Lite Series consists of medium capacity, compression type, stainless-steel points and sensors. The load point assembly is self-checking, free floating to minimize unwanted forces, and is not limited in its positioning to the vessel for tight installations. Each load point comes preassembled with a C2 compatible, matched, and sealed load sensor.

By Staff August 1, 2001

San Diego, Calif.— Advantage Lite Series consists of medium capacity, compression type, stainless-steel points and sensors. The load point assembly is self-checking, free floating to minimize unwanted forces, and is not limited in its positioning to the vessel for tight installations. Each load point comes preassembled with a C2 compatible, matched, and sealed load sensor. Free floating is said to allow the vessel to expand or contract while the critical point of contact of force on the sensor remains the same, thus providing an accurate and consistent weight signal. www.hardinst.com

Hardy Instruments