Universal PC-based controller updates robots

With the growing acceptance of PCs based on Intel Pentium processors and Microsoft Windows NT operating systems, open solutions are spreading into most areas of factory automation. An open solution for robotics is Universal Robot Controller (URC) from Robotic Workspace Technologies (Ft. Myers Beach, Fla.


With the growing acceptance of PCs based on Intel Pentium processors and Microsoft Windows NT operating systems, open solutions are spreading into most areas of factory automation. An open solution for robotics is Universal Robot Controller (URC) from Robotic Workspace Technologies (Ft. Myers Beach, Fla.). URC is designed for plug-and-play retrofits of existing robots, so they can easily implement new motion control technologies. Key benefits for users include communications, connectivity, component standardization and availability, and cost reduction.

All URC hardware and software are off-the-shelf components integrated into an open architecture PC platform. Networking capability is built into URC to allow convenient connectivity for monitoring and reporting. Users can develop custom applications in Visual Basic or C++ to customize the operator interface, do data acquisition, or other manufacturing or data handling routines. Third-party software compliant with Windows NT can also be used.

Standard programming language

To enhance robot uptime despite differing programming languages, RWT also developed RobotScript to control virtually any existing robot.

Studies of robot programs reveal actual robot control code is a small percentage of most programs' total code. Most program lines deal with initialization, logic testing, and branching. Standard PC languages can handle tasks like these, so it was only natural to build a standard control platform on one—Visual Basic with special robot control extensions added.

RobotScript supports all control structures and variable types for building data handling and I/O control applications. Motion planning, data manipulation, and servo control are embedded in intuitive, English-like commands. Joint, straight, tool, and circular motion modes are supported, as well as frames of reference, absolute and relative points, tools, and continuous and point-to-point motion. Since Visual Basic is an ActiveX container, developers can embed existing controls into a new program.

Using commonly available and well-known technologies like Windows and Visual Basic enables RobotScript to incorporate other PC-based applications. One such integration is with Cognex Corp.'s (Natick, Mass.) Checkpoint 900 vision system. URC and the Cognex system were recently added to a 16-year-old robot to perform in-line inspection of production parts for an automotive parts supplier.

Neural networks aid welding

Neural networks are a powerful computing tool for analysis of complex environments. Native American Technologies Co. (Golden, Colo.) develops software for robotic welding applications. Its PNA3 Neural Network models weld shape and size. Other programs measure weld cross-sections and provide process programming and real-time calculation of quality measures. Typical process parameters include voltage, current, ware feed speed, and travel speed. These parameters can be incorporated into RobotScript to enhance control of robotic welding.

For more information, visit www.controleng.com/freeinfo .

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.