WorldFIP Network Helps Citroën Build Automobile Doors

BUS OF THE MONTH: WorldFIP

11/01/1997


C ompetitive pressures in the automobile industry drive manufacturers to continually search for new ways to lower production costs while attempting to improve the quality of products. Since control systems account for a critical segment of manufacturing equipment, new ways to lower costs and simplify control system implementation are considered and usually very carefully examined by systems engineers.

 

eripheral equipment--mainly the I/O systems--could be improved. Beginning with meetings in 1993, Mr. Leblanc and his group began to seek better ways to connect PLCs with the machines they control.

easy task.

The project: fieldbus installation

After careful study and evaluation, Citroën engineers decided to install fieldbus systems based on WorldFIP networking protocol. They decided to begin in the plant area where automobile doors are fabricated. The process involves welding, metal forming, and sealing, with tight coordination of large robots to move the doors between work stations.

 

 

Reducing floor space

Fieldbus use has translated into immediate benefits for the factory-floor workers, according to Mr. Leblanc. Cabling was reduced by 20%, yet only minor modifications were necessary in PLC programming. All previous software was retained. The big savings was in cabinets. Physical size of the PLC was drastically re-duced. PLC cabinets went from five doors to one door, he says, improvingmachinery visibility. Citroën engineers now envision the 'evolu-tion towards zero cabinets.' Mr. Leblanc says the next step in this path might be to elimin-ate TBX modules entirely, and embed the WorldFIP protocol directly into the robots with an ASIC (application specific integrated circuit).

 


Plastics Producer Chooses WorldFIP

David Slingsby, Cegelec Industrial Control Products Div., Staffordshire U.K.

N an-Ya Plastics, an Anglo-Taiwanese collaboration, has installed a state-of-the-art control system in its plant in Louisiana, USA. The new control system allows Nan-Ya to produce very high quality plastic for a variety of consumer goods, demanding use of high-speed machinery operating under very accurate control.

ach with three sections: calendar, mixer, and strainer. For each machine, there were five PLCs, three operator interfaces, 27 ac drives, and two supervising personal computers.

.

ss heavily loaded. The network is more reliable, due to its immunity to electromagnetic interference and its dual redundancy.


WorldFIP at a Glance

John W. Beeston, director of international communications, WorldFIP.

W orldFIP is a full-function producer-consumer style fieldbus started in 1987 (as FIP) by EXERA, a group of multi-industry users. Now a European Standard, it is supported by the international WorldFIP nonprofit association. Major vendor promoters include Cegelec and Groupe Schneider.

three types of traffic in a single connection:

  • Cyclic: Always transmitted on-time, e.g., for closed-loop control.

  • Events: Transmitted when occurring, e.g., for alarms.

  • Messages: Transmitted when required, e.g., download of set-ups, upload of diagnostics.

 

 


Products & Services

WorldFIP PLC

Levallois-Perret Cedex, France-- WorldFIP has been fully implemented into Cegelec's midrange Alspa 80-35 PLC, allowing easy integration with other WorldFIP compatible devices. Data can be exchanged at speeds up to 1 Mbit/sec for distances up to 1 km (copper or fiber optic networks). By offering two independent physical network connections on each node, the WorldFIP module allows dual-redundant network systems to be implemented with ease.
Cegelec

FipConnect Program

Rueil Malmaison, France-- The object of the FipConnect program, developed by Schneider, is to integrate third-party products into FIPIO and WorldFIP architectures. It enables any partner organization to develop a WorldFIP connection on its own equipment. The program covers assistance with de-velopment and provides develop-ment tools, validation, and interoperability tests, as well as promoting the solution. Equipment developed under the program benefits from all the advantages of FIPIO and canstill be used in other WorldFIP environments.
Schneider Electric

FIPway Under Windows

Drancy, France-- The Applicom PC2000FIP card for ISA PCs is equipped with a processor for communication between Microsoft Windows (3.1, 95, and NT) applications and WorldFIP devices using the FIPway protocol. The Applicom server on the PC2000FIP card is available with application program interfaces--FastDDE (Wonderware), AdvanceDDE (Rockwell Software), DLL, and OPC (OLE for Process Control). It is pro-vided with a card configuration tool,as well as test and diagnostic programs.
Applicom International SA

Protocol Analyzer

Paris, France-- FIPWatcher is a low-cost protocol analyzer that acquiresand displays frames running on theWorldFIP bus. It can also capture error frames. FIPWatcher software datesand displays all frames and gives in-formation on their type and content.The package consists of a PC/ISA cardand software that runs under Windows3.1 or 95.
HLP Technologies Circle 254

FIP RemoteI/O System

St. Orens, France-- The LT100 is a compact I/O system for WorldFIP. Each rack accommodates up to 15 separate modules for a total of 960 digital or 240 analog inputs. Each module mounts on a DIN rail and includes one functional module (16 or 64 digital in, 16 analog out, etc.). The system can be programmed in C or in Opal, a Windows-based configuration tool.
Leroy Automatique





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.