Ultrasonic Flowmeters Get the Nod

This is the fourth of a five-part series on Process Sensing. Other installments included pressure sensing (March), smart sensors (May), and temperature sensing (June). The final topic, level sensing, is scheduled for November.Cltrasonic flowmeters have come a long way in gaining market acceptance.

09/01/1998


KEY WORDS

 

  • Process control & instrumentation

  • Flow sensing

  • Ultrasonic flowmeters

This is the fourth of a five-part series on Process Sensing. Other installments included pressure sensing (March), smart sensors (May), and temperature sensing (June). The final topic, level sensing, is scheduled for November.

Cltrasonic flowmeters have come a long way in gaining market acceptance. Recent technological improvements are increasing the accuracy of ultrasonic flowmeters and enabling them to handle a broader range of process conditions. Anticipated industry approvals and a wide variety of sensing technologies are further contributing to the market acceptance of this flow technology.

Consequently, ultrasonic flowmeters are encroaching upon the markets of traditional flow technologies, such as magnetic and differential pressure. Ultrasonic flowmeters, however, still have a number of roadblocks to overcome before gaining full market acceptance. Traditional flowmeter suppliers are taking steps to minimize market attrition.

Gaining market acceptance

Early misapplications and relatively low accuracies of ultrasonic flowmeters left many users with a bad impression. As ultrasonic technologies have improved and become better understood, users have begun applying them correctly, therefore achieving better results. Recent successes in application of ultrasonic flowmeters are changing this flow technology's reputation and encouraging more users to try them in their applications.

Advantages of ultrasonic flowmeters include low maintenance requirements, non-intrusive nature, lack of moving parts, lack of pressure drop, and ability to accurately measure gas flow. The chief disadvantage to ultrasonic flowmeters is a relatively high initial cost when compared to traditional flowmeters. Overall cost of ultrasonic ownership, however, is often less over the life of the product because of lower maintenance costs and higher accuracy.

In addition, improved technology in transit-time ultrasonic flowmeters has led to greater accuracy over a wider range of process conditions. For example, transit-time flowmeters can handle fluids that aren't totally clean. This improvement enables transit-time flowmeters to measure fluids that formerly could only be measured by more expensive Doppler flowmeters.

Development of multipath, or multibeam, transit-time flowmeters has been another important component toward market acceptance of ultrasonic flowmeters. Multipath "ultrasonics" have more than one pair of transducers reflecting an ultrasonic signal in a closed pipe. Through the use of multiple signals, multipath flowmeters achieve much higher accuracies than single path flowmeters.

The improved accuracy of ultrasonic flowmeters is allowing them to make inroads into the gas measurement market. Although the number of ultrasonic flowmeters in gas measurement is still quite small, some natural gas companies are beginning to implement them.

For example, many natural gas companies are testing ultrasonic meters on noncritical applications such as check metering. This approach allows these companies to become familiar with the technology without risking problems to critical applications. As the technology becomes more widely accepted for gas applications, these users will begin applying ultrasonic flowmeters for custody transfer applications.

Ultrasonic flowmeter suppliers are also working on gaining approvals by industry associations, which leads to wider acceptance and use of the technology. Industry association approvals play a major role in user decisions about what types of flowmeters to apply, especially in the oil and gas and refining industries. Ultrasonic flowmeters already have approvals in many European countries for custody transfer applications. In the U.S., the American Gas Association (AGA, Arlington, Va.) is working on use of ultrasonic flowmeters for custody transfer; report AGA-9 is due before fall 1998.

Ultrasonic flowmeter models for closed-pipe applications are available in both transit-time and Doppler technologies. Both technologies depend on ultrasonic signals being changed by the velocity of a flowing stream.

Reflected time difference

For transit-time, a transducer sends a signal across the flowstream to the receiving transducer. The signal is reflected back and sent in the opposite direction. The signal travels faster when moving with the flowstream rather than against the flowstream. The difference between these two transit times is used to calculate the flow rate. Panametric's (Waltham, Mass.) PT868 and Krohne's (Peabody, Mass.) UFM 600 T are examples of transit-time flowmeters.

Doppler flowmeters make use of particles or entrained air moving within the flowstream to measure flow. Doppler flowmeters emit an ultrasonic beam that bounces off particles or entrained air. When the ultrasonic beam is deflected, a frequency shift occurs. The flow rate of the liquid or gas in the stream is proportional to the frequency shift. Polysonics' (Houston, Tex.) DDF4088 and the Spectra from Controlotron (Hauppauge, N.Y.) are among examples of Doppler flowmeters.

Ultrasonic open-channel flowmeters work differently than either transit-time or Doppler flowmeters. Open-channel flowmeters are generally used to measure the flow in rivers, streams, open conduits, and partially filled pipes. Open-channel measurement often occurs with the use of weirs and flumes, which are mechanical devices that guide the flow in a stream.

Stream level measured

Ultrasonic open-channel flowmeters are typically located on the bottom of a channel and send an ultrasonic beam to the flowstream surface where it is reflected. The length of time this beam takes is proportional to the level of the stream. Stream level information can be used to calculate flow rate because the dimensions of weirs and flumes are known. Milltronics' (Arlington, Tex.) OCM III and the FMU 861 from Endress + Hauser (Greenwood, Ind.) are examples of open-channel flowmeters.

In addition to three preceding ultrasonic technologies, new techniques including hybrid meters are directly impacting the market. Hybrid flowmeters are a new variation of ultrasonic flowmeters combine the above technologies. The most common combination is transit-time and Doppler technology. It enables hybrid flowmeters to cover a broader range of process conditions, and to better handle changes in the flow characteristics of the fluid being measured.

For example, if a stream is initially clear and later has particles or entrained air introduced to it, a hybrid flowmeter can shift from transit-time to Doppler technology and continue to measure the flow. Examples of hybrid flowmeters include Panametrics' XMT868 and Controlotron's System 1010.

No quick replacement

One of the most significant topics of discussion in today's flowmeter market is the replacement of traditional flow technologies with ultrasonics. While there is no doubt about increasing use of ultrasonic flowmeters, the speed at which they are replacing traditional flowmeters is limited by several factors. First, traditional technologies such as orifice plate, turbine, and positive displacement meters have a large installed base. Users often prefer to stick with a proven technology, and require a compelling reason to move to a new technology. As a result, they often choose the same type of flowmeter when selecting a replacement. Also, many users simply don't understand the new technologies well enough to feel comfortable selecting them.

Second, traditional flowmeters have the advantage of numerous standards written for their use by industry associations. Despite the anticipated publication of AGA-9, industry approval for ultrasonic flowmeters has been slow. Approval of AGA-9 required two years of sustained effort by AGA members. Despite this approval, the American Petroleum Institute (API, Washington D.C.) does not plan to publish the report in conjunction with the AGA. In addition, there are no immediate plans for either group to publish a standard for the use of ultrasonic flowmeters. AGA-9 simply recommends the proper use of ultrasonic flowmeters without being as a binding legal document or standard.

A further factor which limits the replacement of traditional flowmeters by ultrasonic flowmeters is advances in the area of multivariable flowmeters and primary elements.

Pressure transmitter suppliers, have recognized the trend in the market is toward new flow technologies. These suppliers have responded in two ways: introducing multivariable flowmeters that provide a measurement of inferred mass flow, and accelerating the search for improved primary elements to use with their pressure transmitters.

Among the multivariable flowmeters available are pressure transmitters that use differential pressure, static pressure, and process temperature measurements to calculate mass flow. Prominent examples of these instruments include 3095 MV from Fisher-Rosemount (Austin, Tex.) and SMV 3000 from Honeywell IAC (Phoenix, Ariz.). Multivariable magnetic flowmeters have also been introduced.

Honeywell recently introduced a multivariable version of its MagneW 3000 Plus magnetic flowmeter. It uses a process temperature measurement and a density compensation calculation to deliver mass flow. The main advantage offered by these flowmeters is the ability to perform several measurements, such as pressure, temperature, and flow, in one unit. Disadvantages include typical list prices more than double that of traditional flowmeters; and the need to calculate or infer mass flow rates rather than measuring them directly.

In addition to introducing multivariable flow meters, some pressure transmitter suppliers are taking a new look at the role of primary elements in the measurement of flow. In many cases users purchase pressure transmitters from one supplier and primary elements from another. Fisher Rosemount entered this segment through the acquisition of primary element supplier, Dieterich Standard. Dieterich Standard sells the Annubar, an averaging pitot tube that offers considerable accuracy improvements over the traditional single-point pitot tube.

Fisher-Rosemount went on to integrate its 3095 MV transmitter with the Annubar to create the Mass ProBar, a system that computes mass flow from the differential pressure, static pressure, and temperature process values. Uniqueness of this approach is that it is sold in the form of a differential pressure flowmeter. By integrating a sensing element with a transmitter in a single unit, the Mass ProBar resembles most other flowmeters, simplifying installation and calibration procedures.

Ultrasonic flowmeters have many features appealing to end-users. They are nonintrusive, have no pressure drop, and clamp-on versions can be installed without disturbing the process. As users become more aware of considering cost of ownership in purchasing decisions, the reduced maintenance of ultrasonic flowmeters, in particular, will appeal to small engineering staffs.

Despite all the factors leading toward increased use of ultrasonic flowmeters, traditional flowmeters still offer many advantages.

In addition, new developments in primary elements and multivariable transmitters continue to improve the accuracy and applicability of traditional units. As a result of the large installed base, industry approval, user familiarity, and new technological developments in traditional flowmeter technologies, it will take some time for ultrasonic flowmeters to overcome traditional flowmeters in many industries.

FLOWMETER PROPERTIES

Type

Advantages

Disadvantages

Primary industries

Liquid steam, or gas

Differential pressure-based orifice plate

Low initial cost, familiar technology, easy to use

Subject to plugging, causes pressure drop subject to wear

Chemical, oil and gas, refining, power

All

Magnetic

Accurate, no pressure drop, bidirectional measurement, usable in large pipes

Requires conductive fluids, electrodes subject to coating

Chemical, water and wastewater, pulp and paper, food and beverage

Liquid

Coriolis mass

High accuracy, true mass flow measurement

Vibration sensitive, high initial cost, not suitable for large pipes

Chemical, food and beverage, refining, pulp and paper

All

Thermal mass

Low cost, measures low density fluids

Required periodic cleaning, not highly accurate

Chemical, water and wastewater, power, refining

Gas

Open channel

Many methods available, low installed cost, familiar technology

Subject to clogging, variable accuracy by type

Water and wastewater, chemical, refining, pulp and paper

Liquid

Positive displacement

Accuracy, wide rangeability

Subject to wear, limited user for large pipes, requires clean flow

Oil and gas, refining, chemical, pulp and paper

Liquid, gas

Turbine

Accurate, proven and accepted technology

Wear, high flow can cause meter damage

Oil and gas, refining, chemical, water and wastewater

Liquid, gas

Vortex

Accuracy, ease of installation

Vibration affects accuracy, lacks industry association approvals

Chemical, refining, power, food and beverage

All

Ultrasonic

Low maintenance, nonintrusive, suited to large pipes, clamp-on models available

High initial cost, some models need clean fluids

Water and wastewater, chemical, refining, oil and gas

Liquid, gas



Author Information

David Clayton is a senior analyst with Automation Research Corp. (Dedham, Mass.) and is responsible for following global industrial automation markets. Mr. Clayton received his BS in Electrical Engineering at Northeastern University.




No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.