EC: iMcV-Giga FiberLinX-III Media Converter

Network Integration - Ethernet hardware: The iMcV-Giga FiberLinX-III gigabit intelligent Ethernet media converter combines media conversion and fiber switch functionality in a single device. Additionally, it occupies just one slot in a multi-port chassis, making it even more cost effective. This is a Control Engineering 2014 Engineers’ Choice finalist.

10/17/2013


Network Integration - Ethernet hardware: The iMcV-Giga FiberLinX-III gigabit intelligent Ethernet media converter combines media conversion and fiber switch functionality in a single device. Additionally, it occupies just one slot in a multi-port chassis,iMcV-Giga-FiberLinX-II reduces the cost of network installations by serving as a copper-to-fiber media converter while including built-in functionality similar to that of a Layer 2/3 switch. And its single-wide form factor allows it to occupy just one slot in a multi-port chassis, thus cutting costs even further.

iMcV-Giga-FiberLinX-II supports multiple fiber types including multi-mode and single-mode as well as single-strand fiber, which can effectively double the capacity of installed fiber. It provides bandwidth of up to 1000 Mbps over both the copper and the fiber ports.

iMcV-Giga-FiberLinX-II can be used as a central office infrastructure connection, offering Internet Service Providers (ISPs) and large campuses a less expensive alternative to traditional fiber switches, as lower cost copper switches can be deployed at both ends of the fiber connection. Administrators can observe the end-points and the fiber link between them as single management entities rather than separate elements. Host management traffic is not visible to the remote or customer network nor is access to the customer network required. iMcV-Giga-FiberLinX-II allows for remote configuration. Additional features include the ability to alert administrators to potential problems on the long-haul fiber run, provide vital information on link condition, allow VLAN and non-VLAN traffic on same port, provide differential priority and bi-directional bandwidth control, and report data traffic statistics.

iMcV-Giga FiberLinX-III may be installed in pairs (Host/Remote) or as standalone units connected to another gigabit device.

www.bb-elec.com 

www.bb-elec.com/Products/Ethernet-Media-Converters/IMC-Networks-FTTX-Products/iMcV-Giga-FiberLinX-II-Optical-Ethernet-Demarcatio.aspx 

B&B Electronics



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.