Dual level power terminal blocks have high wire densities

Weidmuller's WDK 10 dual-level power terminal series is designed for use in machinery, process, and power generation applications and have high wiring densities in screw terminals for power distribution applications requiring 6AWG conductors.
By Weidmuller February 4, 2015

Weidmuller's WDK 10 dual-level power terminal series is designed for use in machinery, process, and power generation applications and have high wiring densities in screw terminals for power distribution applications requiring 6AWG conductors. Courtesy: WeWeidmuller’s WDK 10 dual-level power terminal series is designed for use in machinery, process, and power generation applications. They are only 10mm wide and have high wiring densities in screw terminals for power distribution applications requiring 6AWG conductors. The WDK 10 terminal configurations include dual-level grounding, neutral, dual-level with ground, feed-through, 5-wire pre-assembled, and power distribution, 5 wire pre-assembled blocks. The pre-assembled terminals feature a single part number for ease of ordering and handling. Weidmuller’s WDK 10 terminal blocks integrate two independent circuits within one terminal and include corresponding jumpering channels to accommodate the connection of screw-down jumpers to adjacent terminals. An upper- and lower-bussed terminal is available for commoning four wires to one terminal, satisfying a range of power distribution requirements. The WDK 10 features Weidmuller’s vibration-proof and maintenance-free self-locking screw clamp termination technology.

Weidmuller 

www.weidmuller.com 

– Edited by CFE Media. See more Control Engineering energy and power products.