Monoblock inserts for modular connectors

Harting's monoblock E inserts for the Han-Eco and Han-Yellock modular connector series are designed to replace a bigger connector or multiple units for a device or control cabinet.
By Harting December 16, 2014

Harting's monoblock E inserts for the Han-Eco and Han-Yellock modular connector series are designed to replace a bigger connector or multiple units for a device or control cabinet. Courtesy: HartingHarting’s monoblock inserts for the Han-Eco and Han-Yellock modular connector series. are designed to replace a bigger connector or multiple units for a device or control cabinet. The Han-Eco monoblock E inserts with screw termination are designed as snap-in modules for tool-free assembly. Han-Eco monoblocks have more contact density than Han E inserts while still providing the same wire protection. The monoblocks have a rated voltage of 500V and current of 16A and feature a PE contact. This results in contact numbers of 10, 14, 20 and 28 plus PE for the four Han-Eco housing sizes respectively. These monoblocks can be combined with modules from the Han-Modular series in any Han-Eco housing to mix transmission media. The Han-Yellock monoblocks offer 25 or 48 contacts with crimp termination for housing sizes 30 and 60, respectively.

Harting

www.harting-usa.com 

– Edited by CFE Media. See more Control Engineering energy and power products.