Multiposition valves

MW Type multiposition valves offer a variety of flow configurations, port and fitting sizes, and actuation options.

By Control Engineering Staff September 20, 2004

MW Type multiposition valves offer a variety of flow configurations, port and fitting sizes, and actuation options. Preload design lets the rotor be inspected or replaced without removing the valve from the actuator. If the MW valve is equipped with the manufacturer’s microelectric actuator, alignment is automatic. Valves are available with 4-16 positions in five configurations ranging from simple stream selection to more complicated trapping functions. Standard valve body is stainless steel; Hastelloy C-22 or Nitronic 50 is also available.

www.vici.com

Valco Instruments Co. Inc.