Small motors: Nidec Copal sub-miniature step motors in 4, 5, 6, 10 mm sizes
Tiny step motors: Nidec Copal developed a new family of sub-miniature step motors; the smallest is a the LPD4 with a 0.157-in. (4 mm) outside diameter by 0.32-in (8.5 mm) axial length, rated at 3 V dc input.
Enlarged to show detail…
Torrance, CA – Nidec Copal has developed a new family of sub-miniature step motors with the LPD4 (4 mm) and LPD5 (5 mm) representing the smaller of the four member step motor family. The Nidec Copal model LPD4 is a 0.157-in. (4 mm) OD by 0.32-in. (8.15 mm) axial length step motor rated at 3 Volts dc input. The 22.5 degree per step motor develops a holding torque of 0.023 ounce-inches. Maximum pull in speed is 1600 pulses-per-second (pps). Maximum pull out speed is 3000 pulses-per-second. The larger LPD5 model is a 0.197-in. (5 mm) OD by 0.165-in. (4.2 mm) axial length furnishing 0.01 ounce-inches of pull in torque over a wide speed range up to 2000 pps. Input voltage is 4.3 vdc and the LPD5 step angle is 18 degrees per step. Typical applications include miniature medical pumps, fiber optic actuators, camera focus drives, etc. For further information about the LPD4, LPD5, and the two larger LPD6 and LPD10 models, please contact Nidec Copal (USA) Corp. www.nidec-copal-usa.com.
Also read from Control Engineering :
– Small motors market surging in Americas ; and
– Rise of the PM (permanent magnet) machines .
– Edited by Mark T. Hoske, editor in chief, Control Engineering , www.controleng.com