AMCI

SD17040C stepper motor driver

AMCI's SD17040C was designed with the customer in mind. Onboard dip switches simplify set-up and installation, eliminating the need for proprietary software and programming cables. Plus, field changes are a snap, making it easy to reconfigure output current in 0.1A increments or microstepping resolution.

SMD23K EtherCAT Integrated Stepper

AMCI's SMD23K Integrated Stepper is a size 23 3-in-1 Integrated Stepper Motor, Drive, and Controller package with an EtherCat network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD23K incorporates a Stepper Motor + Drive + Controller into a single product that interfaces to your PLC or PAC over the EtherCAT network.

SD31045 stepper motor driver

The SD31045 4.5 Amp stepper motor driver is the latest addition to AMCI's family of stepper motor drivers. Identified through a compact design small footprint, this powerful stepper motor driver is a leader in the 4.5 Amp current range. Incorporating a 310 Vdc motor supply bus, the SD31045 provides stepper motors with plenty of power.

SD7540A Stepper Motor Driver

The AMCI SD7540A is a powerful stepper motor driver in a low cost, compact package. Externally powered from a 24 – 75VDC power supply, this drive pack can operate up to NEMA size 34 motors. With up to 4 Arms(5.6 A peak) of half step and microstepping capabilities, this drive pack provides higher speed and torque than any other drive in its class.

SMD24K Ethercat integrated stepper

AMCI's SMD24K Integrated Stepper is a size 24 3-inch-1 integrated stepper motor, drive and controller package with an EtherCat network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD24K incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the EtherCAT network. Programming and configuration is streamlined because it uses standard commands through your PLC's software that are communicated over the network.

SMD17K EtherCAT integrated stepper

AMCI's SMD17K Integrated Stepper is a size 17, 3-in-1 integrated stepper motor, drive and controller package with an EtherCAT network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD17K incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the EtherCAT network. We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive, and motor.

SMD34K EtherCAT integrated stepper

AMCI's SMD34K Integrated Stepper is a size 34 3-in-1 integrated stepper, motor, drive and controller package with an EtherCat network interface. It is a self-contained motion control product. AMCI's SMD34K incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the EtherCAT network. We've reduced total system costs and simplified installation spyou only have to purchase one product versus a separate controller, drive and motor.

SD17060B stepper motor driver

The SD17060B is a compact and powerful 6.3 arms stepper motor driver that has several updates over its previous iteration (SD17060). A narrower, more compact design retains the standard mounting pattern, but saves valuable panel space. Additionally, improvements to the drive yield a streamlined enclosure, eliminating the finned heat sink and permitting optional panel or side mounting for increased thermal transfer. Set-up and configuration have been simplified via onboard LED diagnostics that communicate specific fault conditions.

SMD24E2 Ethernet Integrated Stepper

AMCI's SMD24E2 Networked Series is a size 24 3-in-1 Integrated Stepper Motor, Drive, and Controller package with network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD24E2 Network Series incorporates a Stepper Motor + Drive + Controller into a single product that interfaces to your PLC or PAC over the network (EtherNet/IP, Modbus-TCP, and Profinet).

SMD23E2 Ethernet integrated stepper

AMCI's SMD23E2 Networked Series is a size 23.3 inch integrated stepper motor, drive and controller package with network interface. It is a self-contained motion control product that is easy to install while delivering best in class performance at a competitive price. AMCI's SMD23E2 Network Series incorporates a stepper motor, drive and controller into a single product that interfaces to your PLC or PAC over the network (EtherNet/IP, Modbus-TCP and Profinet). We've reduced total system costs and simplified installation because you only have to purchase one product versus a separate controller, drive and motor.