Carlo Gavazzi
Articles
Photoelectric sensor series for packaging, material handling applications
Carlo Gavazzi's PD30CN series of photoelectric sensors with PointSpot Beam are designed for packaging, material handling, plastics, and machine tool applications.
Inductive proximity sensors for space-limited applications
Carlo Gavazzi's ICB12S extra-short inductive proximity sensors have a thread length of 23 mm and overall housing lengths as short as 25 mm and are designed for applications where space is limited.
Three-phase pump soft starter for water treatment applications
Carlo Gavazzi's RSWT Series is a self-optimizing 3-phase pump soft starter, in which all three phases are controlled to achieve current balancing on all phases and is designed for agriculture, water treatment, and HVAC applications.
Fiber-optic cables and sensors for industrial applications
Carlo Gavazzi's FA1 Fiber-Optic Amplifier and the FUT and FUR fiber-optic cables are designed for a wide variety of industrial applications and are designed for flexibility.
Analog input solid state proportional controllers
Carlo Gavazzi's Single Phase RGx1P Proportional Output Controllers are designed to control resistive heating elements and speed of ac motors in HVAC applications as well as short wave infrared heaters in semiconductor equipment.
Inductive proximity sensors designed for harsh environments
Carlo Gavazzi's ICS Series of inductive proximity sensors and cordsets are designed for harsh environments and comply with or are certified to IP69K, Ecolab, and FDA standards, and accommodate hot and cold temperature extremes.
Inductive proximity sensors with microprocessor-based design
Carlo Gavazzi's ICB Series of inductive proximity sensors with up to three times sensing range and have a microprocessor-based design allows calibration after the assembly.
Capacitive sensor series has better immunity to dust, humidity, EMI
Carlo Gavazzi's 4th Generation Tripleshield CA18CA capacitive proximity sensors feature improved immunity to dust, humidity, and EMI and also features an optional dust alarm output that gives an early warning of accumulation on the face of the sensor.
Products
Product range for AC three-phase motors
Carlo Gavazzi is excited to introduce the new RSGT Series Soft Starters, an easy-to-use product range for AC 3-phase induction motors up to 75Hp / 55kW. To maximize the ease of use without compromising performance, only three settings are required (FLC, ramp-up, ramp-down). The self-learning algorithm adjusts the soft starter’s parameters to work with different applications and varying load conditions. The integration of a Class 10 electronic overload provides advanced motor protection and results in further space savings in the electrical panel.
Edge gateway and controller for energy monitoring
Carlo Gavazzi is excited to introduce our Powerful UWP 4.0 Series EDGE Gateway/Controller and our DLI-MCG024 Series DALI-2 Submaster. In its 2 DIN compact size, the UWP 4.0 provides a comprehensive solution for gathering information from our broad range of power/energy meters and sensors - storing data into its secure database and exchanging it with the local building management systems (BMS) via standard protocols like BACnet and MODBUS, or remote Energy Management Systems (EMS) with internet protocols like MQTT, FTP, SFTP, FTPS. A comprehensive set of tools targeted at energy and building efficiency include an embedded Webserver for custom dashboards, secure VPN solution (via MAIA Cloud) for remote access to the installation, and powerful functions to manage monitoring data and alarms, setting control functions and sending reports to the user. This type of versatility gives the UWP 4.0 a “Swiss Army Knife” type of functionality. Given that lighting is an important part of the overall energy consumption in any commercial/industrial building, leveraging DALI-2 to provide lighting control functions by means of a robust and mainstream market standard is a “must” when dealing with building efficiency: the new DLI-MCG024 module extends UWP 4.0 capabilities letting it operate as a complete lighting control system in a DALI-2® based installation, or as a part of a bigger DALI-2 architecture, thanks to building energy management systems (BEMS) functions available through BACnet, MODBUS or Rest-API.