Galil's DMC-21x2 and DMC-21x3 Ethernet motion controllers are desinged for extremely cost-sensitive and space-sensitive applicaitons.
Galil’s DMC-21×2 and DMC-21×3 Ethernet motion controllers are desinged for extremely cost-sensitive and space-sensitive applicaitons.
-
Product Description Galil
-
Ethernet 10Base-T port; (1) RS232 port up to 19.2kbaud
-
Ethernet supports multiple masters and slaves. TCP/IP, UDP and ModBus TCP protocol for communication with I/O devices
-
Available in 1 through 8 axis versions
-
User-configurable for stepper or servo motors on any combination of axes. Optional firmware for piezo-ceramic motors. Sinusoidal commutation for brushless servo motors
-
Accepts up to 12 MHz encoder frequencies for servos. Outputs up to 3 MHz for steppers
15 page printable (pdf)
