See hot spots and measure temperatures across wide fields
PRODUCT FEATURES
- 384 × 240-pixel FPA detector with 8–14 μm spectral range for thermal imaging and hot-spot detection
- 60 mK thermal sensitivity for detecting small temperature differences
RELATED PRODUCTS
PRODUCT INFORMATION
MANUFACTURED BY Optris
PUBLISH DATE
October 20, 2026
RELEASE DATE
August 19, 2026
CATEGORY
Process Instrumentation and Sensors
AutomationDirect offers Optris Xi 410 LT series infrared thermal cameras that combine a thermal imaging camera with an infrared pyrometer in a fixed-mount device. The cameras monitor an entire field of view to display heat distribution, detect hot spots and collect multiple temperature measurements.
The Xi 410 LT series uses a 384 × 240 pixel infrared detector with 60 mK thermal sensitivity and an accuracy of ±2°C / ±2%. Its standalone pyrometer mode supports automatic hot spot and cold spot detection, a 1.5 Hz measurement rate and direct 0/4–20 mA output for connection to industrial control systems. Installation options include four field-of-view lens and motorized focus, while power options include 5–30 VDC, Power over Ethernet (PoE) and USB. The IP67- and NEMA 4-rated enclosure is specified for use in dusty, wet and vibration-prone environments.
Available accessories include a stackable process interface module, with up to three modules supported, that adds analog and discrete I/O along with three alarm relay outputs. A Modbus TCP interface kit supports communication with PLCs, SCADA systems and other network devices.
Available from...
AutomationDirect
Edited by Puja Mitra, Arrowfly, for Control Engineering
