A view from the oil patch

An operator discusses the challenges in optimizing or reviving production in declining oil wells.

06/13/2017


Knowing that every well and every production region is unique, an operator in the Gulf Coast agreed to participate in a brief question-and-answer session regarding the challenges he faces in optimizing or reviving production in declining wells and how he overcomes them. Here's what he had to say:

Question: What are the well conditions like in your region?

Answer: Fluid production may range from several barrels a day to several thousands of barrels per day. Gas-to-liquid ratios (GLR) also vary from as low as 1,000 cubic feet (Mcf) per barrel to 10 or more Mcf per barrel. We also see reservoir pressures as low as several hundred psi to more than 10,000 psi. On top of all that, we may see paraffin, scale, and sand production.

Q: What artificial lift technologies are you using in your region?

A: Early in the well's life cycle, when it is still at or near critical velocity, we are using plunger lift, typically with friction-bypass plungers that reduce or even eliminate shut-in times. Once the well's production drops below critical velocity, and depending on the GLR, we typically install a bar stock "cleanout" plunger. We will also install a continuous gas-lift system on wells with higher fluid rates, ranging from 200 to 2,000-plus barrels per day. We have also started combining plunger lift with gas-lift systems on wells that have excessive paraffin and scale production. This combination allows us to effectively run the well on an intermittent basis to save injection gas.

Q: What are the main challenges in your region that artificial-lift technologies can address?

A: For wells with very low GLRs, we have been successful when installing multi-stage systems. This allows us to operate a plunger-lift system effectively with GLRs as low as one Mcf per barrel on some installations. For vertical wells with large perforation intervals, we have found success by employing gas lift several thousand feet below the packer with a "dip tube" that reliably lowers the flowing bottom-hole pressure or an enhanced annular velocity (EAV) system that ensures adequate flow velocity through the entire length of the well.

Q: What are typical results with plunger-lift and gas-lift applications?

A: Typical results for both plunger lift and gas lift on wells that have fallen below critical velocity would be the restoration of production to its natural decline curve. Even wells that have been "loaded" for substantial periods will often recover to their previous production levels with the correct application of plunger-lift and gas-lift systems and technologies.



The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
HMI effectiveness; Distributed I/O; Engineers' Choice Award finalists; System Integrator advice; Inside Machines
Women in engineering; Engineering Leaders Under 40; PID benefits and drawbacks; Ladder logic; Cloud computing
Robotic integration and cloud connections; SCADA and cybersecurity; Motor efficiency standards; Open- and closed-loop control; Augmented reality
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. As we know, PLCs aren’t the only option for making decisions in a control loop, but they are likely why you’re here.
This digital report explains how motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on how advancements in vision system designs, computing power, algorithms, optics, and communications are making machine vision more cost effective than ever before.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
Cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me