Ethernet networks with device level ring technology

Rockwell Automation says it has embedded Ethernet device level ring (DLR) technology into its Integrated Architecture system for high-speed, high-performance applications needing resilient networks, and for machine builders looking for flexible, reliable, low-cost network solutions for their real-time EtherNet/IP applications.

09/01/2009


Device Level Ring

Rockwell Automation says it has embedded Ethernet device level ring (DLR) technology into its Integrated Architecture system for high-speed, high-performance applications needing resilient networks, and for machine builders looking for flexible, reliable, low-cost network solutions for their real-time EtherNet/IP applications. Throughout 2009, Allen-Bradley ControlLogix controllers, I/O systems, and Allen-Bradley Kinetix motion solutions with DLR technology will be made available. Rockwell Automation will also release a stand-alone communication module to help manufacturers connect devices not equipped with DLR technology to the ring.

DLR is a network technology for industrial applications that takes advantage of embedded switch functionality in automation end devices, such as I/O modules and programmable automation controllers, to enable Ethernet ring network topologies at the device level. Unlike a network- or switch-level ring topology that provides resilience to the network infrastructure, DLR technology adds device-level network resilience to optimize machine operation.

When a DLR detects a break in the ring, it provides alternate routing of the data to help recover the network at extremely fast rates. Enhanced diagnostics built into DLR-enabled products identify the point of failure, helping to speed maintenance and reduce mean time to repair.

"Functional tests show that the typical recovery time for a 50-node device level ring is less than three milliseconds," said Mike Hannah, manager, Networks Business, Rockwell Automation. "With this fast recovery, most failures become invisible to devices on the network, and machines often continue operating without interruptions. Keeping production running on the plant floor helps increase machine uptime and productivity—important KPIs for today's manufacturers."

Multiport EtherNet/IP devices equipped with DLR technology connect directly to neighboring nodes and form a ring topology at the end devices. DLR technology reduces the number of external components and associated cabling, which eases design and installation for machine builders.

www.ab.com/networks/switches/embedded.html .

 

www.controleng.com





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.