Analog signal conditioner for current and voltage signal conversion

Weidmuller's ACT20P-PRO DCDC II is a user configurable analog signal conditioner designed to offer secure isolation and precise conversion of current and voltage signals for applications ranging from machine panel control to process automation.
By Weidmuller January 21, 2016

Weidmuller's ACT20P-PRO DCDC II is a user configurable analog signal conditioner designed to offer secure isolation and precise conversion of current and voltage signals for applications ranging from machine panel control to process automation. Courtesy:Weidmuller’s ACT20P-PRO DCDC II is a user configurable analog signal conditioner designed to offer secure isolation and precise conversion of current and voltage signals for applications ranging from machine panel control to process automation. It also provides users the ability to measure, isolate and convert signals from a maximum range of ±300 Vdc or ±100 mA. The output is selectable for either sink or source signals, which makes it suitable for use with any programmable logic controller (PLC) or distributed control system (DCS) analog input card. Flexible power inputs range from 24 Vac/dc to 230 Vac/dc. It also has the ability to run off the ac supply voltage to power dc input and output devices, making it particularly useful in remote applications where only single phase ac voltage is available. The module can be configured and settings adjusted via the front display, or through the additional DIP switches.

Weidmuller

www.weidmuller.com 

– Edited by CFE Media. See more Control Engineering energy and power products.