Engineers develop multimaterial fiber ink for 3-D-printed devices
A method developed by MIT researchers uses standard 3-D printers to produce functioning devices with the electronics already embedded inside and can sense their surroundings, store energy or perform other actions.
A new method developed by MIT researchers uses standard 3-D printers to produce functioning devices with the electronics already embedded inside. The devices are made of fibers containing multiple interconnected materials, which can light up, sense their surroundings, store energy, or perform other actions.
The system makes use of conventional 3-D printers outfitted with a special nozzle and a new kind of filament to replace the usual single-material polymer filament, which typically gets fully melted before it’s extruded from the printer’s nozzle. The researchers’ new filament has a complex internal structure made up of different materials arranged in a precise configuration, and is surrounded by polymer cladding on the outside.
With the printer, the nozzle operates at a lower temperature and pulls the filament through faster conventional printers do, so that only its outer layer gets partially molten. The interior stays cool and solid, with its embedded electronic functions unaffected. In this way, the surface is melted just enough to make it adhere solidly to adjacent filaments during the printing process, to produce a sturdy 3-D structure.
The internal components in the filament include metal wires that serve as conductors, semiconductors that can be used to control active functions, and polymer insulators to prevent wires from contacting each other. As a demonstration, the team printed a wing for a model airplane, using filaments that contained both light-emitting and light-detecting electronics. These components could potentially reveal the formation of any microscopic cracks that might develop.
While the filaments used in the model wing contained eight different materials, Loke said in principle they could contain even more. Until this work, he said, “A printer capable of depositing metals, semiconductors, and polymers in a single platform still did not exist, because printing each of these materials requires different hardware and techniques.”
This method is up to three times faster than any other current approach to fabricating 3-D devices, Loke said, and as with all 3-D printers, offers much more flexibility regarding the kinds of forms that can be produced than typical manufacturing methods do. “Unique to 3-D printing, this approach is able to construct devices of any freeform shapes, which are not achievable by any other methods thus far,” he said.
The method makes use of thermally drawn fibers that contain a variety of different materials embedded within them, a process that Fink and his collaborators have been perfecting for two decades. They have created an array of fibers that have electronic components within them, making the fibers able to carry out a variety of functions. For example, for communications applications, flashing lights can transmit data that is then picked up by other fibers containing light sensors. This approach has for the first time produced fibers, and fabrics woven from them, that have these functions built in.
This process makes this whole family of fibers available as the raw material for producing functional 3-D devices that can sense, communicate, or store energy, among other actions.
To make the fibers themselves, the different materials are initially assembled into a larger-scale version called a preform, which is then heated and drawn in a furnace to produce a very narrow fiber that contains all those materials, in their same exact relative positions but greatly reduced in size.
The method could potentially be developed further to produce a variety of different kinds of devices, especially for applications where the ability to precisely customize each device is essential. One such area is for biomedical devices, where matching the device to the patient’s own body can be important, said Fink, who is a professor of materials science as well as of electrical engineering and computer science and the CEO of the nonprofit Advanced Functional Fabrics of America, and associate director of the Research Laboratory of Electronics.
For example, prosthetic limbs might someday be printed using this method, not only matching the precise dimensions and contours of the patient’s limb, but with all the electronics to monitor and control the limb embedded in place.
Over the years, the group has developed a wide array of fibers containing different materials and functionalities. Loke said virtually all of these can be adapted for the new 3-D-printing technique, making it possible to print objects with a wide variety of different combinations of materials and functions. The device makes use of a standard type of 3-D printer known as a fused deposition modeling (FDM) printer, which is already found in many labs, offices, and even homes.
One application that may be possible in the future would be to print materials for biomedical implants that would provide a scaffolding for the growth of new cells to replace a damaged organ, and include within it sensors to monitor the progress of that growth.
The new method could also be useful for prototyping of devices — already a major application for 3-D printing, but in this case the prototypes would have actual functionality, rather than being static models.
Massachusetts Institute of Technology (MIT)