Wireless dual band radio for access point, client, bridge, repeater

Antaira Technologies' APN-320N(-T) simultaneous dual band radio incorporates two independent radios and can be set up to operate as either an access point, client, bridge, or repeater.
August 1, 2014

Antaira Technologies' APN-320N(-T) simultaneous dual band radio incorporates two independent radios and can be set up to operate as either an access point, client, bridge, or repeater. Courtesy: Antaira TechnologiesAntaira Technologies’ APN-320N(-T) simultaneous dual band radio incorporates two independent radios in a single housing unit. This allows the user to communicate on the 2.4 GHz and 5 GHz frequency ranges simultaneously. The APN-320N(-T) can be set up to operate as either an access point, client, bridge, or repeater. The unit has a maximum data rate of 300Mbps and it can support IEEE 802.11i / 802.1x authentication. 

Both of the radios within the APN-320N(-T) have independent IP addresses as well as RJ45 connection ports. The unit’s connection interface has 2xRJ45 – 10/100 Base T(x) ports per radio. The APN-320N(-T) wireless unit comes with two Omni Directional antennas per radio (total of four antennas) that utilize MIMO technology to improve the communication performance of each radio. The radio has a wide voltage input range of 12-48VDC making it suitable for both mobile and stationary applications.

Antaira Technologies

www.antaira.com 

– Edited by CFE Media. See more Control Engineering wireless products.

Want this article on your website? Click here to sign up for a free account in ContentStream® and make that happen.