Powerful MDR control adds modular safety to conveyors
RELATED PRODUCTS
PRODUCT INFORMATION
MANUFACTURED BY Beckhoff Automation LLC
PUBLISH DATE
April 16, 2026
RELEASE DATE
April 16, 2026
CATEGORY
Motors and Drives
The Beckhoff EP741x motor-driven roller (MDR) controllers are designed for automated material handling systems with powered conveyors. The IP54-protected EtherCAT I/O modules are available with or without integrated safety functions for different application requirements. These conveyor mounted controllers can be distributed across a system and support 24 V and 48 V BLDC motors from different manufacturer, including motorized rollers and flat “pancake” motors. The conveyor-mounted design can reduce wiring complexity and provide additional data for for predictive maintenance and system monitoring.
Increasing automation requirements in e-commerce and intralogistics applications are driving the need for conveyor systems with modular design, flexible configuration and consistent performance. Powered MDR conveyors with zone-based operation can improve efficiency but are often limited by traditional fieldbus systems. The EP741x MDR controllers use EtherCAT communication to support sub-millisecond update rates and large network sizes, with no specified limit on devices connected in a line topology and minimal performance impact from branching. This supports synchronized routing control across large conveyor systems and complex material handling setups.
Built on the EP7402 EtherCAT MDR Controller Box design, the EP741x provides sensorless control of brushless DC motors (BLDC) in the 24 to 48 V voltage range. Using 48 V power supports higher conveyor speeds and longer cable runs while reducing the risk of voltage sag. The modules are compatible with motor rollers from multiple suppliers, which can simplify engineering and help reduce spare parts inventories. The controllers are available in a 2-channel version (EP7412) and a 4-channel version (EP7414) designed to reduce cost.
The cascadable IP54 -rated design with integrated cables and standardized M8 or M12 connectors can reduce costs, wiring errors and installation time. A reduced installation depth supports direct mounting with conveyor rail profiles where space is limited.
The system includes an optional Safe Torque Off (STO) function implemented via Safety over EtherCAT (FSoE). Unlike conventional approaches that shut down the entire power supply to meet emergency-stop requirements, the EP741x-9071 disconnects the motor power stage internally without cutting power to the module. This allows the control electronics to remain powered, maintaining access to input states, motor data and safety diagnostics while maintaining a safe state.
A decentralized safety architecture enables configuration of individual safety zones within a single EtherCAT network, supporting modular system design and reducing the need for additional safety components or parallel wiring. For applications with lower safety requirements, Beckhoff also offers 2-channel and 4-channel variants without safety functionality (EP741x-0071), designed to reduce cost.

Beckhoff Automation LLC
Edited by Puja Mitra, WTWH Media, for Control Engineering


