Must worker do a job he's afraid is unsafe?

No way am I going to clean those tanks without special spiked shoes," declared Maintenance Department Utility Worker Jon Chan after being instructed by Foreman Bill Saunders to clean the sludge from two tanks in the lab.

03/01/2000


No way am I going to clean those tanks without special spiked shoes," declared Maintenance Department Utility Worker Jon Chan after being instructed by Foreman Bill Saunders to clean the sludge from two tanks in the lab.

"Other guys do the job wearing ordinary work shoes. What makes you an exception?"

"I've got common sense," Chan replied. "The job's unsafe. I have seen too many accidents. Peterson ended up in the hospital."

"An accident can occur on any assignment. Peterson's the only one who has been hurt in those tanks."

"There was another accident a year ago. I'm not risking my butt on that job."

"I'm not gonna stand here arguing with you. The rule says do the job that's assigned and register your beef later if you wish."

When Chan refused to back down, Saunders ordered him to clock out. Next day, his boss informed him he was suspended.

Chan threatened to fight for his rights.

Question: Is Chan within his rights in refusing the assignment? Can he overturn the suspension?

Fenster's decision: "Chan's entitled to refuse that assignment if he's afraid of it," Plant Engineer Aaron Fenster told Saunders. "Ordinarily a worker's required to do the job and grieve afterwards. But where the objection is based on fear for his safety or health, it's another matter entirely. Only one restriction applies. The refusal must be supported by evidence that lends credence to his anxiety. The accidents referred to in this case should be sufficient to legitimatize Chan's refusal. Those spiked shoes should have been issued long ago. If they're not on hand, order them."





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.