More Ethernet for industrial distributed/remote I/O use

Vendors of distributed/remote I/O and fieldbus organizations will step up the development of application protocols based on core layers of Ethernet now that the worldwide market for Ethernet-based buses and networks is forecast to grow at an annual rate of 13.3% through 2010. That rate compares to the overall industrial distributed/remote I/O market growth rate of 5.9% for the same period. The study from Venture Development Corp. (VDC) also reported that Ethernet-based buses/networks comprised 15% of worldwide distributed/remote I/O shipments in 2005 and forecast it to be over 20% by 2010. Current & forecast worldwide shipment shares of distributed/remote I/O with Ethernet connectivity (percent of dollar volumes):

• 2005 Total: $3,188.8 million; Non-Ethernet-based buses/ networks: 85.3%; Ethernet-based buses/ networks: 14.7%; and,

• 2010 Total: $4,256.5 million; Non-Ethernet-based buses/ networks: 79.4%; Ethernet-based buses/ networks: 20.6%.

Ethernet offers advantages over industrial fieldbuses, VDC says, including easy integration with office IT, high bandwidth and large data packets, low cost, and remote configuration.

Vendors of distributed/remote I/O systems and fieldbus organizations have taken steps to develop application layer protocols that operate on the core layers of Ethernet.

Largest 2005 worldwide distributed/remote I/O market shares with dedicated Ethernet-based bus/network application layer protocols were Modbus TCP, Ethernet/IP and Profinet.

www.vdc-corp.com

Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.