Operator control station controller has IO, ports for serial, Ethernet, CAN

Horner's EXL10 operator control station (OCS) controller uses Horner's built-in XL Series I/O and features three Modbus Serial ports, dual independent Ethernet ports, and dual CAN ports.
By Horner Automation Group August 9, 2015

Horner's EXL10 operator control station (OCS) controller utilizes Horner's built-in XL Series I/O and features three Modbus Serial ports, dual independent Ethernet ports, and dual CAN ports. Courtesy: Horner Automation GroupHorner’s EXL10 operator control station (OCS) controller uses Horner’s built-in XL Series I/O and features three Modbus Serial ports (RS232/485), dual independent Ethernet ports, and dual CAN ports. The two CAN ports use CsCAN for Distributed Plug and Play I/O over a 500 m distance while providing support for CANopen and J1939 for mobile applications. The 10.4-in. VGA color touchscreen complements Horner’s Cscape 9.6, SP3 programming software. The crispness and size of the EXL10’s high-performance screen make the controller useful in ambient lighting conditions. The large VGA color touchscreen enhances graphics while providing high outdoor visibility. Other features include dual 10/100MB (Auto-MDIX) Ethernet for Modbus TCP C/S, HTTP, FTP and SMTP. It also has USB 2.0 ports for programming and flash drive support and a 32 GB microSD slot for application updates and data logging.

Horner Automation Group

www.heapg.com 

– Edited by CFE Media. See more Control Engineering HMI and operator interface products.