Control Engineering Salary and Career Survey, 2018

Career Update 2018: Engineers are getting paid more and a greater percentage expect to get increases in 2018, but the technical challenge and a general feeling of accomplishment remains the highest factors for job satisfaction.

05/15/2018


Engineers are getting paid more in 2018 ($100,339 compared to $96,045 for 2017 survey respondents), and 75% expect to get a salary increase in 2018, according to respondents to the Control Engineering Salary and Career Survey for 2018. That's up from 69% who expected an increase in 2017. Additionally, technical challenge and feeling of accomplishment both rank higher than compensation for job satisfaction criteria.

Figure 1: 75% expect a salary increase; nearly 20% expect 4% or more in 2018. Courtesy: Control Engineering 2018 Salary and Career SurveyFigure 2: 31% expect an increase in 2018 non-salary compensation and about half of those expect more than a 6% increase. Courtesy: Control Engineering 2018 Salary and Career Survey

As figure 1 shows, almost 20% expect 4% or more for a salary increase in 2018 (up from 13% in 2017); 7% expect an increase more than 6% (up from 4% in 2017); 23% expect the same (29% did in 2017); and just 2% expect a salary decrease (equal to 2017).

Upward salary pressures correspond with strong U.S. manufacturing results, more than 19 months of growth as of March, according to the Institute for Supply Management (ISM) monthly purchasing manufacturers' index (PMI). 

Survey methods

Figure 3: In 2018, average salary of respondents topped $100,000, with average non-salary compensation adding more than $10,000. Courtesy: Control Engineering 2018 Salary and Career SurveySurvey respondents for the Control Engineering Career and Salary Report for 2018 were invited to anonymously provide their annual compensation information and opinions on the current state of their facilities and industries. The 2018 Control Engineering Career and Salary Report reflects data gathered from 331 automation professionals; margin of error is +/- 5.4% at a 95% confidence level.

For non-salary compensation (figure 2), 21% expect an increase (down from 27% in 2017); 15% expect an increase of 4% or more (10% in 2017); 9% expect more than a 6% increase (6% in 2017); 58% expect about the same (62% in 2017); and 11% expect less (same as 2017).

For base salary compensation, the minimum was $25,000 (same as 2017) and the maximum was $342,000 ($216,513 in 2017), for 299 survey respondents providing this information. For non-salary compensation, the 2018 average received among 299 respondents was $10,091 (up from $9,594 in 2017); among the 68% receiving a bonus (203 respondents) was about the same as 2017, and the average was $14,863 (up from $14,216 in 2017). The highest bonus reported, as figure 3 shows, was $344,000. 

Bonus criteria

By a significant amount, the two leading criteria for bonus compensation was company profits, 73%, and personal performance, 62% (Figure 4), which is a significant shift from 59% and 43%, respectively, in 2017.

Other significant criteria from 35% to 25% include product profitability, safety metrics, new business, sales increase, quality metrics, and plant or line productivity. Graphic shows five other double-digit criteria, least among them energy efficiency at 11%. 

Figure 4: Leading criteria for non-salary compensation by significant margin are company profitability and personal performance with product profitability and safety metrics next in line. Courtesy: Control Engineering 2018 Salary and Career Survey

Technical challenge, accomplishment

Rank order of job satisfaction factors (Figure 5) year over year remained the same for the top four: technical challenge, feeling of accomplishment, financial compensation, and relationship with colleagues. (The top two usually remain solidly ahead of financial compensation except during an economic downturn.)

Figure 5: Top job satisfaction factors are technical challenge and feeling of accomplishment, followed by financial compensation and relationship with colleagues. Courtesy: Control Engineering 2018 Salary and Career Survey

Location moved into the fifth spot, up from eighth in 2017, which is perhaps in line with various reports of more workplaces offering work-at-home options. Statistically within the margin of error are the next four criteria on the list: benefits, flexible work hours, job security, and feeling of recognition. Flexible work hours was added to the list in 2018 and made a strong debut at seventh in the ranking. 

What should get emphasis

The survey asked respondents what areas do and should get emphasis within their organizations. There continues to be a significant disparity between what does and what should receive emphasis. Top three areas that do get emphasis are budget, profits, financials (an addition in 2018 based on write-in entries in 2017), automation and controls, and operations.

Figure 6: In the areas of operations, budget, profits, financials get the highest emphasis, but automation and controls should receive the highest emphasis. Courtesy: Control Engineering 2018 Salary and Career Survey

The top three areas that should get emphasis are automation and controls, customers and sales (another new entry in 2018), and for third, it'sa statistical toss-up among operations, product development, and safety.

The 2018 respondents also noted that training and education, often identified as most lacking measured by overall percentage, should get more than three times the emphasis it currently does.

Mark T. Hoske is content manager, Control Engineering, CFE Media, mhoske@cfemedia.com. Data provided by CFE Media research director, Amanda Pelliccione, apelliccione@cfemedia.com.

KEYWORDS

  • Engineer salary survey, career report
  • Average salary increased
  • More salary increases are expected.

CONSIDER THIS

See additional information and career advice for engineers linked below and past salary surveys.

 

Now available: the full 2018 Career and Salary Report... including respondent regions, titles, functions, company size, staffing, energy, cybersecurity, outsourcing, and salary and non-salary compensation benchmarks by age, education, number of years with employer and industry, by job title, by job function, and by employees managed, among other information.

Below, see links to Advice from survey respondents; Women in engineering; The future of work; Engineering career ROI, and prior Salary and Career Reports.

 



Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Engineers' Choice Awards
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by Control Engineering subscribers. Vote now (if qualified)!
System Integrator Giants
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
How to Maximize Factory Automation Efficiency with Low Cost Machine Vision
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Wireless Reliability in Harsh Environments
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
Human Factors and the Impact on Plant Safety
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
May 2018
Salary and Career Survey, IT and OT convergence, robotic standards and safety, secure circuit protection
April 2018
Cybersecurity best practices, artificial intelligence, robotic additive manufacturing, embedded systems, IIoT integration, energy efficiency
March 2018
Digitalization integration, process sensors, edge computing, fog computing, condition monitoring, and motors
Edge Computing
This article collection contains several articles on how today's technologies heap benefits onto an edge-computing architecture such as faster computing, better networking, more memory, smarter analytics, cloud-based intelligence, and lower costs.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
PLCs
Programmable logic controllers (PLCs) represent the logic (decision) part of the control loop of sense, decide, and actuate. Featured articles in this digital report compare PLCs and programmable automation controllers (PACs), industrial PCs, and robotic controllers.
SIDB

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
John O. Ayuk, PE, CFSE, PMP, CAP
Automation Engineer; Wood Group
Doug Baker
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me